Overview
This course provides the required knowledge and skills for qualified plumbers and gasfitters to register for a Restricted Electrical Licence (REL). This course is also open to late stage plumbing apprentices who are currently supervised by a supervisor who holds the Restricted Electrical Licence.
This licence will allow you to work on water heaters which are connected to a low voltage wiring installation. The licence is issued by Access Canberra ACT Government and not CIT.
Qualification: |
Statement of Attainment - Restricted Electrical Disconnect - Reconnect |
Course No: |
SA-TS102 |
Campus: |
CIT Fyshwick |
Duration: |
You will be required to attend CIT 8-hours per day (face to face) once a week for 10 weeks up to a total of 80 hours, to cover skills and knowledge components.
You will work through a series of learning activities, quizzes and practicals in a portfolio or on CIT's online learning platform, eLearn. |
Cost Info: |
Further information about fees is available at Course fees and assistance
|
Indicative Cost: |
$2,215 |
Likely Job Outcome: |
Gives qualified plumbers and gas fitters skills and knowledge to register for Restricted Electrical Licence (REL) through Access Canberra. |
Application Type: |
Register Your Interest |
Share: |
|
Timetable Information
To help with the enrolment process print your timetable, or keep the window open, so that you can refer back to it for your course code, course name, and the Course Reference Numbers (CRNs) or Block Code.
Additional Information
Licence Eligibility - once enrolled at CIT, participants are required to apply for a Restricted Disconnect Reconnect permit with Access Canberra, ACT Government.
Entry Requirements
Be a licenced tradesperson employed in the following trades only: Plumbing and gas fitter, Type B gas appliances, or Refrigeration Air Conditioning or other trade that is eligible, where disconnection and reconnection of electrical wiring is a component of the work performed.
OR
Be currently undertaking an apprenticeship in the plumbing trade under the supervision of an individual with a Restricted Electrical Licence.
Skills Recognition
To study any course at CIT (excluding non-accredited training) you must have a Unique Student Identifier (USI).
Literacy Skills Information
We suggest that you will need Australian Core Skills Framework literacy levels of at least 3 across reading, writing, learning, oral communication and, depending on your course of study, numeracy skills to successfully complete this course. If you do not have this level, you can still enrol and seek support to improve your skills or you may prefer to begin with the lower level course. Please visit Foundation Skills.
Transition Information
Qualifications at CIT are regularly updated or replaced to meet current industry needs and maximise your employment opportunities. If this occurs while you are part way through a qualification, you may need to vary your learning to meet the new national requirements. CIT will aim to make this as smooth as possible for you.
Subject Cancellations/Changes
To ensure positive outcomes for all students, CIT may need to cancel or change classes at short notice. CIT will make every effort to inform students as soon as changes are made and will also make every effort to offer alternative arrangements for students to meet the requirements of the subject and complete their qualification. In an unfortunate instance when this cannot be met, you will receive a full refund. Please ensure you maintain current contact details via CIT Self Service or by contacting CIT Student Services at infoline@cit.edu.au.
Subject Information
Complete 4 subjects
Core: Complete all 4
- UEERL0004 Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring
-
CIT Code: | ELEC1570 |
Cost: | Full fee $800.00 |
Description: | This unit involves the skills and knowledge required to disconnect and reconnect electrical equipment connected to low voltage (LV) installation wiring. It includes preparing electrical equipment for disconnecting and then reconnecting equipment connected to LV installation wiring. It also includes inspecting and testing the reconnected electrical equipment for safe operation, identifying and reporting electrical faults and providing status reports. This must be incidental to a primary or regular function of the workplace. The unit excludes disconnecting or reconnecting circuits at a switchboard or to general electrical accessories (including switches, socket outlets and circuit protective devices), or installation of or alteration to any part of the fixed electrical wiring system (defined as electrical installation work).The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.).The skills and knowledge described in this unit may require a license to practice in the workplace where plant and equipment operate at voltage above 50 V a.c. or 120 V d.c. However other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to regulations directly related to occupational health and safety and where applicable contracts of training such as apprenticeships. Additional and/or other conditions may also apply under State and Territory legislation and regulations related to licencing, electrical work and work health and safety (WHS)/occupational health and safety (OHS) regulations, which must be confirmed prior to commencing this unit. In some jurisdictions additional information related to licencing may be required on certification documentation. Further guidance can be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide. |
Prerequisites: | UEECD0007 Apply work health and safety regulations, codes and practices in the workplace |
- UEERL0005 Locate and rectify faults in low voltage (LV) electrical equipment using set procedures
-
CIT Code: | ELEC1591 |
Cost: | Full fee $800.00 |
Description: | This unit involves the skills and knowledge required to locate and rectify faults in low voltage (LV) electrical equipment.It includes following workplace procedures to inspect and test electrical equipment, identify and rectify faults and complete reporting. This must be incidental to a primary or regular function of the workplace. The Range of Conditions describes exclusions for this unit of competency.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.).The skills and knowledge described in this unit may require a license to practice in the workplace where plant and equipment operate at voltage above 50 V a.c. or 120 V d.c. However other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to regulations directly related to occupational health and safety and where applicable contracts of training such as apprenticeships.Additional and/or other conditions may also apply under State and Territory legislation and regulations related to licencing, electrical work and work health and safety (WHS)/occupational health and safety (OHS) regulations, which must be confirmed prior to commencing this unit.In some jurisdictions additional information related to licencing may be required on certification documentation. Further guidance can be found in the UEE Electrotechnology Training Package Companion Volume Implementation Guide. |
Prerequisites: | UEECD0007 Apply work health and safety regulations, codes and practices in the workplace UEERL0004 Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring |
- UEERL0001 Attach cords and plugs to electrical equipment for connection to a single phase 230 Volt supply
-
CIT Code: | ELEC1563 |
Cost: | Full fee $350.00 |
Description: | This unit involves the skills and knowledge required to attach flexible cord and plug to electrical equipment for connection to a single phase supplies up to 230 volts (V) alternating current (a.c.) supply.It includes planning and attaching flexible cord and plug, using test equipment for inspection and safety testing. It also includes locating, inspecting, testing and repairing faults in flexible cords and plugs.This unit does not cover the knowledge and skills necessary for work associated with high current faults on complex electrical apparatus, circuits and electrical work; in hazardous areas or on electrical equipment that is part of an explosion-protection technique; nor, work associated with fixed wiring.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 V a.c. or 120 V direct current (d.c.). Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, is required. Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations. |
Prerequisites: | UEECD0007 Apply work health and safety regulations, codes and practices in the workplace |
- UEECD0007 Apply work health and safety regulations, codes and practices in the workplace
-
CIT Code: | ELEC1369 |
Cost: | Full fee $265.00 |
Description: | This unit involves the skills and knowledge required to apply work health and safety (WHS)/occupational health and safety (OHS) regulations and codes of practices in the electrotechnology workplace.It includes applying safe working practices, following workplace procedures for hazard identification and risk control. It also includes electrotechnology worker responsibilities and application for health and safety, risk management and adherence to safety practices as part of electrotechnology work functions when preparing to enter a work area.No licensing, legislative or certification requirements apply to this unit at the time of publication. |
Prerequisites: | Nil |
Related Courses
More Information
For more information about this course please contact CIT Student Services on (02) 6207 3188 or email infoline@cit.edu.au