Skip to Content
Need Help Live Chat
Certificate III in Roof Plumbing CPC32620
Show sidebar
  1. Home
  2. Courses
  3. Trades
  4. Plumbing
  5. Roof Plumbing

Overview

This qualification reflects the role of a person installing, maintaining and repairing flashings, metal roof and wall claddings and rainwater products such as gutters and downpipes, and other accessories on residential, industrial and commercial buildings.

Qualification:

 Certificate III in Roof Plumbing CPC32620

Next Intake:

 Semester 1 2025

Course No:

 C3-TS42

Campus:

 CIT Fyshwick 

Duration:

 Apprentices will attend CIT one full day per week (over two semester periods - 18 weeks in each semester).

Apprentices will engage in up to 3 hours per week of independent learning in addition to regular attendance (over two semester periods - 18 weeks in each semester).

Cost Info:

Fee information for completing this course under an Australian Apprenticeship arrangement is available on the Apprenticeships and Traineeships page. The total course cost may vary if subjects are attempted more than once.

Indicative Cost:

 Apprentice/Trainee
  • Subsidised fee $680

Likely Job Outcome:

 Roof plumber.

Application Type:

 Apprentice/Trainee
Share:

Additional Information

You will be required to provide protective clothing and equipment including safety gasses, hearing protection and safety boots. You will also need to have a tape measure and a pair of left and right handed snips.

Persons holding the qualifications the may be entitled to apply for registration outside the ACT - this is a licensed class in some jurisdictions.

Entry Requirements

As you are entering this program as an apprentice under the Australian Apprenticeships arrangements, you must be employed in the industry and you must register with an Apprentice Network Provider (ANP) prior to enrolment.

Prior to commencing your training at CIT, you will be required to undertake a Language, Literacy and Numeracy (LLN) assessment to help identify areas where you may require additional assistance to achieve your qualification.

It is highly recommended that you have CPCCWHS1001 Prepare to work safely in the construction industry before entering a construction worksite

Include Asbestos awareness.

Skills Recognition

To study any course at CIT (excluding non-accredited training) you must have a Unique Student Identifier (USI).

Literacy Skills Information

We suggest that you will need Australian Core Skills Framework levels of at least 2 across reading, writing, learning, oral communication and, depending on your course of study, numeracy skills to successfully complete this course. If you do not have this level, you can still enrol and seek support to improve your skills or you may prefer to begin with a lower level course, or enrol in the Certificate II in Skills for Work and Vocational Pathways (FSK20119) to develop your literacy skills. Please visit CIT Foundation Skills page.

Transition Information

Qualifications at CIT are regularly updated or replaced to meet current industry needs and maximise your employment opportunities. If this occurs while you are part way through a qualification, you may need to vary your learning to meet the new national requirements. CIT will aim to make this as smooth as possible for you.

Subject Cancellations/Changes

To ensure positive outcomes for all students, CIT may need to cancel or change classes at short notice. CIT will make every effort to inform students as soon as changes are made and will also make every effort to offer alternative arrangements for students to meet the requirements of the subject and complete their qualification. In an unfortunate instance when this cannot be met, you will receive a full refund. Please ensure you maintain current contact details via CIT Self Service or by contacting CIT Student Services at infoline@cit.edu.au.


Subject Information

Complete 23 subjects

Complete all 10

  • CPCCCM2012   Work safely at heights
    • CIT Code: CNST847
      Cost: Standard $60.00
      Apprentice $60.00
      Description: This unit specifies the skills and knowledge required to work safely on construction sites where the worker has the potential to fall from one level to another. This unit of competency does not cover the erection of scaffold or work platforms, but it does include identifying and reporting common faults with scaffold or work platform systems. Work at heights is undertaken in a range of construction work, including new construction, renovation, refurbishment and maintenance. This unit also applies to workers in other industries who need to control the two separate risks associated with people and objects falling from heights. Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCCWHS1001 Prepare to work safely in the construction industry meets this requirement. Licensing, legislative, regulatory or certification requirements apply to this unit of competency in some states and territories. For further information, check with the relevant regulatory authority.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
  • CPCCWHS2001   Apply WHS requirements, policies and procedures in the construction industry
    • CIT Code: CNST843
      Cost: Standard $20.00
      Apprentice $20.00
      Description: This unit specifies the outcomes required to carry out work health and safety (WHS) requirements through safe work practices in all on- or off-site construction workplaces. It requires the performance of work in a safe manner through awareness of risks and work requirements, and the planning and performance of safe work practices with concern for personal safety and the safety of others. The unit covers fundamental WHS requirements necessary to undertake work tasks within any sector in the construction industry. It includes the identification of hazardous materials, including asbestos, and compliance with legislated work safety practices. It does not cover removal of asbestos, which is a licensed activity. It applies to workers in the construction industry. This unit also relates directly to the general construction induction training requirements of the Model Work Health and Safety Regulations 2011 and relevant occupational health and safety regulations for Victoria and for Western Australia. Achievement of CPCCWHS1001 Prepare to work safely in the construction industry covers these induction training requirements.
      Prerequisites: Nil
  • CPCCCM2008   Erect and dismantle restricted height scaffolding
    • CIT Code: CNST839
      Cost: Standard $60.00
      Apprentice $60.00
      Description: This unit specifies the skills and knowledge required to erect and dismantle restricted height scaffolding to provide work platforms for various occupational applications. This unit is restricted to modular scaffolding to a height of 4 metres and includes: - placement of safety barriers - the application of knowledge to handle, erect and dismantle a range of restricted height scaffolding systems. It applies to workers who work in a range of industries. It involves working in a team environment.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
  • CPCCCM3001   Operate elevated work platforms up to 11 metres
    • CIT Code: CNST787
      Cost: Standard $60.00
      Apprentice $60.00
      Description: This unit of competency specifies the outcomes required to operate specific types of elevated work platforms (EWPs) safely and effectively in different locations, including on uneven terrain. The unit includes locating, setting up, operating and shutting down scissor lifts and self-propelled boom lifts with a boom length under 11 metres. The unit supports construction workers in the safe and effective operation of electrical, hydraulic and mechanical EWPs. The unit does not cover truck-mounted EWPs, powered telescoping devices, hinged devices or articulated devices, or any combination of these used to support a platform on which personnel, equipment and materials may be elevated to perform work and which has a boom length of 11 metres or more. It applies to construction work on residential and commercial work sites in new construction, renovation or refurbishment, and maintenance projects. Licensing, legislative, regulatory or certification requirements apply to this unit in some States. Relevant state and territory regulatory authorities should be consulted to confirm those requirements.
      Prerequisites: Nil
  • HLTAID011   Provide first aid
    • CIT Code: HESC586
      Cost: Standard $140.00
      Apprentice $40.00
      Description: This unit describes the skills and knowledge required to provide a first aid response to a casualty in line with first aid guidelines determined by the Australian Resuscitation Council (ARC) and other Australian national peak clinical bodies. The unit applies to all persons who may be required to provide a first aid response in a range of situations, including community and workplace settings. Specific licensing/regulatory requirements relating to this competency, including requirements for refresher training should be obtained from the relevant national/state/territory Work Health and Safety Regulatory Authorities.
      Prerequisites: Nil
  • CPCPCM2041   Work effectively in the plumbing services sector
    • CIT Code: PLMB607
      Cost: Standard $11.00
      Apprentice $11.00
      Description: This unit specifies the skills and knowledge required to comply with effective workplace performance within the plumbing and services sector.In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
      Prerequisites: Nil
  • CPCPCM2045   Handle and store plumbing materials
    • CIT Code: PLMB609
      Cost: Standard $11.00
      Apprentice $11.00
      Description: This unit specifies the skills and knowledge required to safely handle and store plumbing materials and identify and address environmental concerns and associated hazards, including the disposal of waste. In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
      Prerequisites: CPCPCM2043 Carry out WHS requirements
  • CPCPCM2043   Carry out WHS requirements
    • CIT Code: PLMB608
      Cost: Standard $11.00
      Apprentice $11.00
      Description: This unit specifies the skills and knowledge required to carry out work health and safety (WHS) requirements in a plumbing and services work environment.In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
      Prerequisites: Nil
  • CPCPCM2048   Cut and join sheet metal
    • CIT Code: PLMB612
      Cost: Standard $11.00
      Apprentice $11.00
      Description: This unit specifies the skills and knowledge required to cut and join sheet metal in the plumbing and services industry.In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
      Prerequisites: CPCPCM2043 Carry out WHS requirements
  • CPCPCM2055   Work safely on roofs
    • CIT Code: PLMB617
      Cost: Standard $11.00
      Apprentice $11.00
      Description: This unit specifies the skills and knowledge required to work safely on roofing structures.In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
      Prerequisites: CPCPCM2043 Carry out WHS requirements

Complete all 13

  • CPCPCM2040   Read plans, calculate quantities and mark out materials
    • CIT Code: PLMB685
      Cost: Standard $30.00
      Apprentice $30.00
      Description: This unit specifies the skills and knowledge required to read and interpret construction and plumbing plans and specifications and obtain dimensions to calculate material quantities and mark out materials.In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
      Prerequisites: CPCPCM2043 Carry out WHS requirements
      CPCPCM3024 Prepare simple drawings
  • CPCPCM2047   Carry out levelling
    • CIT Code: PLMB611
      Cost: Standard $30.00
      Apprentice $30.00
      Description: This unit specifies the skills and knowledge required to plan and use levelling equipment. In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
      Prerequisites: CPCPCM2043 Carry out WHS requirements
  • CPCPCM3021   Flash penetrations through roofs and walls
    • CIT Code: PLMB618
      Cost: Standard $57.00
      Apprentice $57.00
      Description: This unit specifies the skills and knowledge required to set out, cut and flash roof and wall penetrations. In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
      Prerequisites: CPCPCM2043 Carry out WHS requirements
  • CPCPRF2023   Collect and store roof water
    • CIT Code: PLMB657
      Cost: Standard $33.00
      Apprentice $33.00
      Description: This unit specifies the skills and knowledge required to collect and store roof water. It includes installing storage tanks and related piping for the collection and storage of roof water.In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
      Prerequisites: CPCPCM2043 Carry out WHS requirements
  • CPCPRF3022   Fabricate and install roof drainage systems
    • CIT Code: PLMB660
      Cost: Standard $12.00
      Apprentice $12.00
      Description: This unit specifies the skills and knowledge required to fabricate and install roof drainage systems and associated rainwater components. In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
      Prerequisites: CPCPCM2043 Carry out WHS requirements
      CPCPCM2055 Work safely on roofs
  • CPCPRF3023   Fabricate and install external flashings
    • CIT Code: PLMB661
      Cost: Standard $33.00
      Apprentice $33.00
      Description: This unit specifies the skills and knowledge required to fabricate and install external flashings. In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
      Prerequisites: CPCPCM2043 Carry out WHS requirements
      CPCPCM2055 Work safely on roofs
  • CPCPRF3024   Install roof components
    • CIT Code: PLMB662
      Cost: Standard $33.00
      Apprentice $33.00
      Description: This unit specifies the skills and knowledge required to install roof components. It includes flashing penetrations through a roof to maintain weatherproofing. In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
      Prerequisites: CPCPCM2043 Carry out WHS requirements
      CPCPCM2055 Work safely on roofs
  • CPCPRF3025   Install roof coverings to curved roof structures
    • CIT Code: PLMB663
      Cost: Standard $33.00
      Apprentice $33.00
      Description: This unit specifies the skills and knowledge required to set out and install a curved roof on a roof structure. It includes drawing fabrication patterns based on sketches of roof coverings, calculating curve dimensions and sheet lengths, and selecting required roofing materials.In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
      Prerequisites: CPCPCM2043 Carry out WHS requirements
      CPCPCM2055 Work safely on roofs
  • CPCPRF3026   Install roof sheets, wall cladding and complex flashings
    • CIT Code: PLMB664
      Cost: Standard $33.00
      Apprentice $33.00
      Description: This unit specifies the skills and knowledge required to install roof sheets, wall cladding and complex flashings. In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
      Prerequisites: CPCPCM2043 Carry out WHS requirements
      CPCPCM2055 Work safely on roofs
  • CPCPRF2024   Fabricate roof coverings for curved structures
    • CIT Code: PLMB658
      Cost: Standard $33.00
      Apprentice $33.00
      Description: This unit specifies the skills and knowledge required to design and fabricate curved industrial roof coverings.It covers drawing fabrication patterns based on sketches of roof coverings, calculating curve dimensions and selecting roofing materials for new or existing, domestic or commercial structures.The unit is suitable for people with basic skills and knowledge who undertake routine work tasks under the direction of more experienced workers.In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
      Prerequisites: CPCPCM2043 Carry out WHS requirements
  • CPCPRF4011   Design and size roof drainage systems
    • CIT Code: PLMB665
      Cost: Standard $24.00
      Apprentice $24.00
      Description: This unit specifies the skills and knowledge required to design, size and document the layout of roof drainage systems for Class 1 and 6 buildings as defined in the National Construction Code (NCC).In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
      Prerequisites: Nil
  • CPCPRF2022   Select and install roof sheeting and wall cladding
    • CIT Code: PLMB691
      Cost: Standard $33.00
      Apprentice $33.00
      Description: This unit specifies the skills and knowledge to select and install insulation, roof battens and wall cladding involving metallic, non-metallic or other approved roof covering materials. In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
      Prerequisites: CPCPCM2043 Carry out WHS requirements
      CPCPCM2055 Work safely on roofs
  • CPCPCM3024   Prepare simple drawings
    • CIT Code: PLMB689
      Cost: Standard $30.00
      Apprentice $30.00
      Description: This unit specifies the skills and knowledge required to produce onsite drawings for plumbing services work. In some jurisdictions, this unit of competency may form part of accreditation, licensing, legislative, regulatory or certification requirements.
      Prerequisites: CPCPCM2043 Carry out WHS requirements

Related Courses

Certificate III Plumbing CPC32420
Certificate II Drainage CPC20720
Statement Attainment Water Plumbing (Licensing)
Statement Attainment Drainage (Licensing)
Statement Attainment Plumbing Work Practice
Statement Attainment Gasfitting Plumbing (Licensing)
Statement Attainment Backflow Prevention
Statement Attainment Sanitary Pipework (Licensing)
Statement Attainment Plumbing Prevocational Skills
Statement Attainment Hot Water Temperature Control Devices
Statement Attainment Restricted Electrical Disconnect - Reconnect
Statement Attainment training Duct Installation

More Information

For more information about this course please contact CIT Student Services on (02) 6207 3188 or email infoline@cit.edu.au