Electrotechnology Electrician : Canberra Institute of Technology

Overview

Do you want to be a Sparky?

This qualification provides you with the skills and knowledge to select, install, set up, test, fault find, repair and maintain electrical systems and equipment in buildings and premises.

The skills and knowledge described in this qualification require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.).

You will have many 'hands-on' opportunities to practice and develop your skills to industry standard in our custom-built electrical workshops. You will learn and work with electrical equipment associated with sizing and testing of electrical control and power circuits with application to Australian and New Zealand standards.

On successful completion, you will be able to apply for your electrical licence through State and Territory regulators and work as a fully qualified electrician.

Qualification:	Certificate III in Electrotechnology Electrician UEE30820
Next Intake:	Semester 1 2025
Course No:	C3-TS40
Campus:	CIT Fyshwick
Duration:	6 semesters part-time (approx. 8 hours per week) then final Verification unit to be completed during 4th and final year of study.
Cost Info:	Fee information for completing this course under an Australian Apprenticeship arrangement is available on the Apprenticeships and Traineeships page. The total course cost may vary if subjects are attempted more than once.
Indicative Cost:	Apprentice/Trainee - Subsidised - $2,532 - Full Fee - $23,500
Likely Job Outcome:	Work as a qualified Electrician, you may work in specialised areas of the electrical industry which includes domestic, commercial and industrial environments within those installations you will work on communications, controls, general wiring systems and wiring installations including renewable and sustainable energy systems.
Application Type:	Apprentice/Trainee
Share:	Email Facebook LinkedIn

Additional Information

Industry-standard dress code is required.

On successful completion of this qualification, graduates may apply for an Electricians licence (Unrestricted class) in the various states and territories of Australia to work as a fully qualified electrician.
This licence is issued by the Construction Occupations Registrar of Access Canberra (ACT Government). CIT does not issue this licence.

Entry Requirements

As you are entering this course as an apprentice under the Australian Apprenticeships arrangements, you must be employed in the electrical contracting industry and you must register with an Apprentice Network Provider (ANP) prior to enrolment.

You MUST be supervised by licensed electrician.
This program has pre-requisite requirements, all prerequisites must be achieved. Discuss with a CIT teacher during enrolment to ensure you have met these requirements.

Skills Recognition

To study any course at CIT (excluding non-accredited training) you must have a Unique Student Identifier (USI).

Literacy Skills Information

We suggest that you will need Australian Core Skills Framework literacy levels of at least 3 across reading, writing, learning, oral communication and, depending on your course of study, numeracy skills to successfully complete this course. If you do not have this level, you can still enrol and seek support to improve your skills or you may prefer to begin with the lower level course. Please visit Foundation Skills.

Transition Information

Qualifications at CIT are regularly updated or replaced to meet current industry needs and maximise your employment opportunities. If this occurs while you are part way through a qualification, you may need to vary your learning to meet the new national requirements. CIT will aim to make this as smooth as possible for you.

Subject Cancellations/Changes

To ensure positive outcomes for all students, CIT may need to cancel or change classes at short notice. CIT will make every effort to inform students as soon as changes are made and will also make every effort to offer alternative arrangements for students to meet the requirements of the subject and complete their qualification. In an unfortunate instance when this cannot be met, you will receive a full refund. Please ensure you maintain current contact details via CIT Self Service or by contacting CIT Student Services at infoline@cit.edu.au.

Subject Information

Complete 1110 credit points (Core 990 credit points and Electives 120)

Stage 1/1.5 Core - Complete all 320 cr points

UEECD0007 Apply work health and safety regulations, codes and practices in the workplace

CIT Code:	ELEC1369
Cost:	Apprentice $51.00
Credit Points:	20
Description:	This unit involves the skills and knowledge required to apply work health and safety (WHS)/occupational health and safety (OHS) regulations and codes of practices in the electrotechnology workplace.It includes applying safe working practices, following workplace procedures for hazard identification and risk control. It also includes electrotechnology worker responsibilities and application for health and safety, risk management and adherence to safety practices as part of electrotechnology work functions when preparing to enter a work area.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Prerequisites:	Nil

UEECD0016 Document and apply measures to control WHS risks associated with electrotechnology work

CIT Code:	ELEC1374
Cost:	Apprentice $51.00
Credit Points:	20
Description:	This unit involves the skills and knowledge required to identify, document and apply work health and safety (WHS)/occupational health and safety (OHS) hazard and risk control measures associated with electrotechnology work.It includes identifying workplace hazards, assigning levels of risk, developing control measures to eliminate and/or mitigate risks, reviewing risk control measures and maintaining documentation of hazards, risk control measures and their application in accordance with compliance procedures.This unit addresses information, processes and techniques for the application of WHS/OHS, specific to working in the electrotechnology sector and is essential for workers without managerial or supervisory responsibilities.Typically, this unit will relate to the type of job being undertaken, electrical conditions, energy levels, radiation levels, toxic substances, airborne particles, pressure discharge, explosive atmosphere, worksite location, general worksite conditions, specific work location, moving parts, tools and equipment, workers competence and/or capacity and/or personal effects.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Prerequisites:	UEECD0007 Apply work health and safety regulations, codes and practices in the workplace

UEECD0019 Fabricate, assemble and dismantle utilities industry components

CIT Code:	ELEC1376
Cost:	Apprentice $96.00
Credit Points:	40
Description:	This unit involves the skills and knowledge required to fabricate, assemble and dismantle utilities industry components using fitting and metal fabrication techniques.It includes the safe use of hand tools, fixed and portable power tools; cutting, shaping, joining and fixing; using metallic and non-metallic materials; dismantling and assembling equipment; mechanical measurement and marking out; and, reading drawings/diagrams.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Prerequisites:	UEECD0007 Apply work health and safety regulations, codes and practices in the workplace

UEECD0020 Fix and secure electrotechnology equipment

CIT Code:	ELEC1377
Cost:	Apprentice $51.00
Credit Points:	20
Description:	This unit involves the skills and knowledge required to fix, secure and mount electrotechnology equipment to hollow walls, solid walls and metal fixings.It includes the safe use of hand and portable tools/ power tools and the selection and safe application of fixing devices and supporting accessories/equipment.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Prerequisites:	UEECD0007 Apply work health and safety regulations, codes and practices in the workplace

UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications

CIT Code:	ELEC1392
Cost:	Apprentice $96.00
Credit Points:	40
Description:	This unit involves the skills and knowledge required to use drawings, diagrams, cable schedules, industry standards, codes of practice and specifications as they apply to various electrotechnology work functions.It includes interpreting schematic, wiring and mechanical diagrams, equipment and cable/connection schedules and manuals; and the use and format of compliance standards, codes and job specifications used in the electrotechnology industry. It also includes the use of site and architectural drawings/plans to show the location of services, apparatus, plant and machinery.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Prerequisites:	UEECD0007 Apply work health and safety regulations, codes and practices in the workplace

UEEEL0023 Terminate cables, cords and accessories for low voltage circuits

CIT Code:	ELEC1493
Cost:	Apprentice $85.00
Credit Points:	40
Description:	This unit involves the skills and knowledge required to terminate cables, cords and their conductors at accessories and current-using devices, designed to operate at voltages up to 1,000 volts (V) alternating current (a.c.) or 1,500 V direct current (d.c.).It includes working safely to industry standards, wiring systems, cable types and applications; selecting appropriate termination accessories; preparing and terminating cables and cords; terminating cables/cord conductors; and ensuring completed termination complies with industry standard requirements.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 V a.c. or 120 V d.c.Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, may be required.Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Prerequisites:	UEECD0007 Apply work health and safety regulations, codes and practices in the workplace UEECD0019 Fabricate, assemble and dismantle utilities industry components UEECD0020 Fix and secure electrotechnology equipment UEECD0044 Solve problems in multiple path circuits UEECD0046 Solve problems in single path circuits UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications

UEECD0044 Solve problems in multiple path circuits

CIT Code:	ELEC1571
Cost:	Apprentice $51.00
Credit Points:	40
Description:	This unit involves the skills and knowledge required to solve problems in multiple path circuits.It includes working safely; applying problem-solving procedures, including the use of voltage, current and resistance measuring devices; and providing solutions derived from measurements and calculations to predictable problems in multiple path circuits.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Prerequisites:	UEECD0007 Apply work health and safety regulations, codes and practices in the workplace UEECD0046 Solve problems in single path circuits

UEECD0046 Solve problems in single path circuits

CIT Code:	ELEC1572
Cost:	Apprentice $51.00
Credit Points:	40
Description:	This unit involves the skills and knowledge required to solve problems in single path circuits.It includes working safely; applying problem-solving procedures, including the use of basic voltage, current and resistance measuring devices; and providing known solutions to predictable circuit problems.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Prerequisites:	UEECD0007 Apply work health and safety regulations, codes and practices in the workplace

UEEEL0021 Solve problems in magnetic and electromagnetic devices

CIT Code:	ELEC1573
Cost:	Apprentice $66.00
Credit Points:	30
Description:	This unit involves the skills and knowledge required to determine correct operation of electromagnetic devices and related circuits and provide solutions as they apply to electrical installations and equipment.It includes working safely; applying power circuit problem-solving processes, including the use of testing and measuring devices; and providing solutions derived from measurements and calculations to predictable problems in electromagnetic devices and related circuits.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.). Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, may be required. Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Prerequisites:	UEECD0007 Apply work health and safety regulations, codes and practices in the workplace UEECD0044 Solve problems in multiple path circuits UEECD0046 Solve problems in single path circuits

UEEEL0019 Solve problems in direct current (d.c.) machines

CIT Code:	ELEC1574
Cost:	Apprentice $66.00
Credit Points:	30
Description:	This unit involves the skills and knowledge required to determine correct operation of direct current (d.c.) machines and provide solutions as they apply to electrical installations and equipment.It includes working safely, the use of testing and measuring devices, and providing solutions derived from measurements and calculations to predictable problems in d.c. machines.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V d.c.Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, may be required.Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Prerequisites:	UEECD0007 Apply work health and safety regulations, codes and practices in the workplace UEECD0044 Solve problems in multiple path circuits UEECD0046 Solve problems in single path circuits UEEEL0021 Solve problems in magnetic and electromagnetic devices

Stage 2/2.5 Core - Complete all 340 cr points

UEERE0001 Apply environmentally and sustainable procedures in the energy sector

CIT Code:	ELEC1558
Cost:	Apprentice $40.00
Credit Points:	20
Description:	This unit involves the skills and knowledge required to apply environmentally sustainable procedures in the energy sector.It includes identifying and applying sustainable methods of work practice that minimise energy and material usage and to apply energy reduction strategies in the energy sector workplace.No licensing, legislative or certification requirements apply to this unit at the time of publication.
Prerequisites:	Nil

UEEEL0008 Evaluate and modify low voltage heating equipment and controls

CIT Code:	ELEC1575
Cost:	Apprentice $37.00
Credit Points:	20
Description:	This unit involves the skills and knowledge required to evaluate and modify low voltage (LV) heating equipment and controls.It includes working safely, identifying faults in heating equipment, repairing heating equipment, ensuring all work complies with relevant Australian Standards and legislation, and completing work and documenting activities.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.). Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, may be required. Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Prerequisites:	UEECD0007 Apply work health and safety regulations, codes and practices in the workplace UEECD0019 Fabricate, assemble and dismantle utilities industry components UEECD0020 Fix and secure electrotechnology equipment UEECD0044 Solve problems in multiple path circuits UEECD0046 Solve problems in single path circuits UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications UEEEL0019 Solve problems in direct current (d.c.) machines UEEEL0020 Solve problems in low voltage a.c. circuits UEEEL0021 Solve problems in magnetic and electromagnetic devices UEEEL0023 Terminate cables, cords and accessories for low voltage circuits

UEEEL0003 Arrange circuits, control and protection for electrical installations

CIT Code:	ELEC1484
Cost:	Apprentice $65.00
Credit Points:	40
Description:	This unit involves the skills and knowledge required to select, arrange and terminate circuits, control and protection devices and systems for electrical installations operating at low voltage (LV).It includes protection of persons and property, correct functioning, ensuring compatibility with the supply, arranging installation into circuits, selecting and arranging switchgear/control gear and protective devices to meet compliance requirements, and documenting arrangement decisions.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.).Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, may be required.Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Prerequisites:	UEECD0007 Apply work health and safety regulations, codes and practices in the workplace UEECD0019 Fabricate, assemble and dismantle utilities industry components UEECD0020 Fix and secure electrotechnology equipment UEECD0044 Solve problems in multiple path circuits UEECD0046 Solve problems in single path circuits UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications UEEEL0019 Solve problems in direct current (d.c.) machines UEEEL0020 Solve problems in low voltage a.c. circuits UEEEL0021 Solve problems in magnetic and electromagnetic devices UEEEL0023 Terminate cables, cords and accessories for low voltage circuits

UEEEL0018 Select wiring systems and select cables for low voltage electrical installations

CIT Code:	ELEC1490
Cost:	Apprentice $110.00
Credit Points:	60
Description:	This unit involves the skills and knowledge required to select wiring systems and cables for electrical installations operating at voltages up to 1,000 volt (V) alternating current (a.c.) or 1,500 V direct current (d.c.).It includes application of wiring systems and cable types, selecting wiring system compatible with the installation conditions, selecting cables that comply with required current-carrying capacity and voltage drop and earth fault-loop impedance limitations, coordinating between protective devices and conductors, and documenting selection decisions.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 V a.c. or 120 V d.c..Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, may be required.Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Prerequisites:	UEECD0007 Apply work health and safety regulations, codes and practices in the workplace UEECD0019 Fabricate, assemble and dismantle utilities industry components UEECD0020 Fix and secure electrotechnology equipment UEECD0044 Solve problems in multiple path circuits UEECD0046 Solve problems in single path circuits UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications UEEEL0003 Arrange circuits, control and protection for electrical installations UEEEL0008 Evaluate and modify low voltage heating equipment and controls UEEEL0009 Evaluate and modify low voltage lighting circuits, equipment and controls UEEEL0010 Evaluate and modify low voltage socket outlets circuits UEEEL0019 Solve problems in direct current (d.c.) machines UEEEL0020 Solve problems in low voltage a.c. circuits UEEEL0021 Solve problems in magnetic and electromagnetic devices UEEEL0023 Terminate cables, cords and accessories for low voltage circuits UEEEL0024 Test and connect alternating current (a.c.) rotating machines UEEEL0025 Test and connect transformers

UEEEL0009 Evaluate and modify low voltage lighting circuits, equipment and controls

CIT Code:	ELEC1576
Cost:	Apprentice $37.00
Credit Points:	20
Description:	This unit involves the skills and knowledge required to evaluate and modify low voltage (LV) lighting circuits, equipment and controls.It includes working safely, identifying faults in luminaires and associated control equipment, repairing/replacing luminaire and control equipment components, ensuring all work complies with relevant Australian Standards and legislation, and completing work and documenting activities.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.). Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, may be required. Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Prerequisites:	UEECD0007 Apply work health and safety regulations, codes and practices in the workplace UEECD0019 Fabricate, assemble and dismantle utilities industry components UEECD0020 Fix and secure electrotechnology equipment UEECD0044 Solve problems in multiple path circuits UEECD0046 Solve problems in single path circuits UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications UEEEL0019 Solve problems in direct current (d.c.) machines UEEEL0020 Solve problems in low voltage a.c. circuits UEEEL0021 Solve problems in magnetic and electromagnetic devices UEEEL0023 Terminate cables, cords and accessories for low voltage circuits

UEEEL0010 Evaluate and modify low voltage socket outlets circuits

CIT Code:	ELEC1577
Cost:	Apprentice $37.00
Credit Points:	20
Description:	This unit involves the skills and knowledge required to evaluate and modify low voltage (LV) socket outlets circuits.It includes working safely, identifying and repairing/replacing faulty socket outlets, ensuring all work complies with relevant Australian Standards and legislation, and completing work and documenting activitieThe skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.). Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, may be required. Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Prerequisites:	UEECD0007 Apply work health and safety regulations, codes and practices in the workplace UEECD0019 Fabricate, assemble and dismantle utilities industry components UEECD0020 Fix and secure electrotechnology equipment UEECD0044 Solve problems in multiple path circuits UEECD0046 Solve problems in single path circuits UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications UEEEL0019 Solve problems in direct current (d.c.) machines UEEEL0020 Solve problems in low voltage a.c. circuits UEEEL0021 Solve problems in magnetic and electromagnetic devices UEEEL0023 Terminate cables, cords and accessories for low voltage circuits

UEEEL0020 Solve problems in low voltage a.c. circuits

CIT Code:	ELEC1491
Cost:	Apprentice $140.00
Credit Points:	80
Description:	This unit involves the skills and knowledge required to ascertain correct operation of single and three phase alternating current (a.c.) circuits and solving circuit problems as they apply to servicing, fault finding, installation and compliance work functions.It includes safe working practices, multi-phase circuit arrangements, issues related to fault protection, power factor and multiple earthed neutral (MEN) systems and solutions to circuit problems derived from calculated and measured parameters.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) a.c. or 120 V direct current (d.c.). Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, may be required. Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Prerequisites:	UEECD0007 Apply work health and safety regulations, codes and practices in the workplace UEECD0044 Solve problems in multiple path circuits UEECD0046 Solve problems in single path circuits UEEEL0021 Solve problems in magnetic and electromagnetic devices

UEEEL0024 Test and connect alternating current (a.c.) rotating machines

CIT Code:	ELEC1578
Cost:	Apprentice $113.00
Credit Points:	50
Description:	This unit involves the skills and knowledge required to test and connect alternating current (a.c.) rotating machines. It includes safe working practices, ascertaining correct operation of a.c. machines and solving problems as they apply to servicing, fault finding, installation and compliance work functionsThe skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) a.c. or 120 V direct current (d.c.). Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, may be required. Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Prerequisites:	UEECD0007 Apply work health and safety regulations, codes and practices in the workplace UEECD0019 Fabricate, assemble and dismantle utilities industry components UEECD0020 Fix and secure electrotechnology equipment UEECD0044 Solve problems in multiple path circuits UEECD0046 Solve problems in single path circuits UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications UEEEL0019 Solve problems in direct current (d.c.) machines UEEEL0020 Solve problems in low voltage a.c. circuits UEEEL0021 Solve problems in magnetic and electromagnetic devices UEEEL0023 Terminate cables, cords and accessories for low voltage circuits

UEEEL0025 Test and connect transformers

CIT Code:	ELEC1579
Cost:	Apprentice $57.00
Credit Points:	30
Description:	This unit involves the skills and knowledge required to solve problems in transformers. It includes safe working practices, ascertaining correct operation of transformers and solving problems as they apply to servicing, fault finding, installation and compliance work functions.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.). Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, may be required. Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Prerequisites:	UEECD0007 Apply work health and safety regulations, codes and practices in the workplace UEECD0019 Fabricate, assemble and dismantle utilities industry components UEECD0020 Fix and secure electrotechnology equipment UEECD0044 Solve problems in multiple path circuits UEECD0046 Solve problems in single path circuits UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications UEEEL0019 Solve problems in direct current (d.c.) machines UEEEL0020 Solve problems in low voltage a.c. circuits UEEEL0021 Solve problems in magnetic and electromagnetic devices UEEEL0023 Terminate cables, cords and accessories for low voltage circuits

Stage 3/3.5 Core - Complete all 230 cr points

UEEEL0012 Install low voltage wiring, appliances, switchgear and associated accessories

CIT Code:	ELEC1580
Cost:	Apprentice $106.00
Credit Points:	40
Description:	This unit includes the installation of wiring enclosures, cable support systems, cables, protection devices, switchgear, control gear, switchboards, and accessories designed to operate at voltages up to 1,000 volt (V) alternating current (a.c.) or 1,500 V direct current (d.c.).It covers working safely and to installation standards, routing cables to specified locations, terminating cables and connecting wiring at accessories, matching appliances and accessories with that specified, making required circuit connections and completing the necessary installation documentation.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 V a.c. or 120 V d.c.Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, may be required.Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Prerequisites:	UEECD0007 Apply work health and safety regulations, codes and practices in the workplace UEECD0016 Document and apply measures to control WHS risks associated with electrotechnology work UEECD0019 Fabricate, assemble and dismantle utilities industry components UEECD0020 Fix and secure electrotechnology equipment UEECD0044 Solve problems in multiple path circuits UEECD0046 Solve problems in single path circuits UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications UEEEL0003 Arrange circuits, control and protection for electrical installations UEEEL0005 Develop and connect electrical control circuits UEEEL0008 Evaluate and modify low voltage heating equipment and controls UEEEL0009 Evaluate and modify low voltage lighting circuits, equipment and controls UEEEL0010 Evaluate and modify low voltage socket outlets circuits UEEEL0014 Isolate, test and troubleshoot low voltage electrical circuits UEEEL0018 Select wiring systems and select cables for low voltage electrical installations UEEEL0019 Solve problems in direct current (d.c.) machines UEEEL0020 Solve problems in low voltage a.c. circuits UEEEL0021 Solve problems in magnetic and electromagnetic devices UEEEL0023 Terminate cables, cords and accessories for low voltage circuits UEEEL0024 Test and connect alternating current (a.c.) rotating machines UEEEL0025 Test and connect transformers

UEEEL0014 Isolate, test and troubleshoot low voltage electrical circuits

CIT Code:	ELEC1581
Cost:	Apprentice $125.00
Credit Points:	60
Description:	This unit involves the skills and knowledge required to isolate, test and troubleshoot electrical circuits operating at voltages up to 1,000 volts (V) alternating current (a.c.) or 1,500 V direct current (d.c.).It includes working safely, isolating electrical circuits, evaluating low voltage (LV) electrical circuits, applying systematic fault-finding procedures, conducting repairs and completing the necessary documentation.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical circuits and equipment which are designed to operate at voltages greater than 50 V a.c. or 120 V d.c. Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, may be required. Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Prerequisites:	UEECD0007 Apply work health and safety regulations, codes and practices in the workplace UEECD0019 Fabricate, assemble and dismantle utilities industry components UEECD0020 Fix and secure electrotechnology equipment UEECD0044 Solve problems in multiple path circuits UEECD0046 Solve problems in single path circuits UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications UEEEL0003 Arrange circuits, control and protection for electrical installations UEEEL0019 Solve problems in direct current (d.c.) machines UEEEL0020 Solve problems in low voltage a.c. circuits UEEEL0021 Solve problems in magnetic and electromagnetic devices UEEEL0023 Terminate cables, cords and accessories for low voltage circuits UEEEL0024 Test and connect alternating current (a.c.) rotating machines UEEEL0025 Test and connect transformers UEEEL0047 Identify shut down and restart systems with alternate supplies

UEEEL0005 Develop and connect electrical control circuits

CIT Code:	ELEC1486
Cost:	Apprentice $140.00
Credit Points:	80
Description:	This unit involves the skills and knowledge required to develop, connect and functionally test electrical power and control circuits that perform specific control functions.It includes working safely, developing schematic diagrams and converting them to wiring diagrams, selecting and connecting contactors and control devices to perform a specific function. It also includes testing electrical control circuits and completing circuit development activities documentation.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.).Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, may be required.Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Prerequisites:	UEECD0007 Apply work health and safety regulations, codes and practices in the workplace UEECD0019 Fabricate, assemble and dismantle utilities industry components UEECD0020 Fix and secure electrotechnology equipment UEECD0044 Solve problems in multiple path circuits UEECD0046 Solve problems in single path circuits UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications UEEEL0003 Arrange circuits, control and protection for electrical installations UEEEL0019 Solve problems in direct current (d.c.) machines UEEEL0020 Solve problems in low voltage a.c. circuits UEEEL0021 Solve problems in magnetic and electromagnetic devices UEEEL0023 Terminate cables, cords and accessories for low voltage circuits UEEEL0024 Test and connect alternating current (a.c.) rotating machines UEEEL0025 Test and connect transformers

HLTAID009 Provide Cardiopulmonary resuscitation

CIT Code:	HESC588
Cost:	Apprentice $18.00
Credit Points:	10
Description:	This unit describes the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) guidelines.This unit applies to all persons who may be required to provide CPR, in a range of situations, including community and workplace settings.Specific licensing/regulatory requirements relating to this competency, including requirements for refresher training should be obtained from the relevant national/state/territory Work Health and Safety Regulatory Authorities.
Prerequisites:	Nil

UETDRRF004 Perform rescue from a live LV panel

CIT Code:	WPHS144
Cost:	Apprentice $60.00
Credit Points:	20
Description:	This unit covers the performance of rescue procedures from live low voltage (LV) apparatus, not including overhead lines and underground cables in the workplace. It specifies the mandatory requirements of rescue from a live LV panel and how they apply in the context of transmission, distribution or rail work functions. It encompasses responsibilities for health, safety and risk management processes at all operative levels and adherence to safety practices as part of the normal way of doing work. The application of the skills and knowledge described in this unit may require a licence/registration to practice in the workplace subject to regulations for undertaking of electrical work. Other conditions may apply under state and territory legislative and regulatory licensing requirements which must be confirmed prior to commencing this unit.
Prerequisites:	HLTAID009 Provide Cardiopulmonary resuscitation

UEEEL0047 Identify shut down and restart systems with alternate supplies

CIT Code:	ELEC1582
Cost:	Apprentice $29.00
Credit Points:	20
Description:	This unit involves the skills and knowledge required to identify, shut down and restart systems with alternate supplies.It includes identifying the system configuration, working safely with electricity generation systems and inverters, identifying hazards and controlling the associated risks, isolation and testing for de-energisation, reinstating the system after isolation, and completing relevant documentation.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.). Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, may be required. Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.
Prerequisites:	UEECD0007 Apply work health and safety regulations, codes and practices in the workplace UEECD0019 Fabricate, assemble and dismantle utilities industry components UEECD0020 Fix and secure electrotechnology equipment UEECD0044 Solve problems in multiple path circuits UEECD0046 Solve problems in single path circuits UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications UEEEL0003 Arrange circuits, control and protection for electrical installations UEEEL0019 Solve problems in direct current (d.c.) machines UEEEL0020 Solve problems in low voltage a.c. circuits UEEEL0021 Solve problems in magnetic and electromagnetic devices UEEEL0023 Terminate cables, cords and accessories for low voltage circuits

Stage 3/3.5 Solar Telecom Electives - Complete 120 cr points

UEEDV0005 Install and maintain cabling for multiple access to telecommunication services

CIT Code:	ELEC1422
Cost:	Apprentice $142.00
Credit Points:	80
Description:	This unit involves the skills and knowledge required to install and maintain telecommunications cabling in buildings and premises.It includes working to relevant regulations, legislation, codes of practice and industry standards and to Australian Communications and Media Authority's (ACMA) Telecommunications Cabling Provider Rules; installing multiple telecommunication lines for multiple access to telecommunication services; terminating at telecommunication outlets, termination modules and distributors; testing for compliance and completing cabling documentation.This unit applies to customer cabling terminated on distributors and to the installation, maintenance and modification of indoor, external, underground cabling and customer cabling and may be used to connect devices for a range of applications, including telecommunications phones, data (video and multimedia) and security (alarms and fire protection).Work functions in the occupational areas where this unit may be used are subject to regulatory requirements. Refer to the UEE Electrotechnology Training Package Companion Volume Implementation Guide or the relevant regulator for specific guidance on requirements.
Prerequisites:	UEECD0007 Apply work health and safety regulations, codes and practices in the workplace UEECD0019 Fabricate, assemble and dismantle utilities industry components UEECD0020 Fix and secure electrotechnology equipment UEECD0044 Solve problems in multiple path circuits UEECD0046 Solve problems in single path circuits UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications

UEEDV0008 Install, modify and verify coaxial and structured communication copper cabling

CIT Code:	ELEC1424
Cost:	Apprentice $70.00
Credit Points:	40
Description:	This unit involves the skills and knowledge required to install, modify and verify coaxial and structured communication copper cabling in buildings and premises intended for connection to a telecommunications network as permitted by the Australian Communications and Media Authority (ACMA).It includes working safely to industry standards; installing generic, structured twisted pair cabling (category 5 and above) and coaxial cabling that terminate at distributors, termination modules and telecommunication outlets; testing for compliance; and completing cabling documentation.Work functions in the occupational areas where this unit may be used are subject to regulatory requirements. Refer to the UEE Electrotechnology Training Package Companion Volume Implementation Guide or the relevant regulator for specific guidance on requirements.
Prerequisites:	UEECD0007 Apply work health and safety regulations, codes and practices in the workplace UEECD0019 Fabricate, assemble and dismantle utilities industry components UEECD0020 Fix and secure electrotechnology equipment UEECD0044 Solve problems in multiple path circuits UEECD0046 Solve problems in single path circuits UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications UEEDV0005 Install and maintain cabling for multiple access to telecommunication services

Stage 3/3.5 Solar PV Electives - Complete 120 cr points

UEERE0054 Conduct site survey for grid-connected photovoltaic and battery storage systems

CIT Code:	ELEC1594
Cost:	Apprentice $110.00
Credit Points:	30
Description:	This unit involves the skills and knowledge required to complete site surveys for grid-connected photovoltaic and battery storage systems. It includes safe work practices, site inspection processes and procedures, service provider responsibilities, consulting with qualified people to assess client energy demand requirements and assessing grid-connected equipment options to meet client requirements and site conditions. It also covers provision of advice to the client on battery storage standards, codes of practices, government/utilities incentive schemes, and information related to the installation of a grid-connected photovoltaic and battery storage systems. No licensing, legislative or certification requirements apply to this unit at the time of publication.
Prerequisites:	Nil

UEERE0080 Install photovoltaic power conversion equipment to grid

CIT Code:	ELEC1595
Cost:	Apprentice $125.00
Credit Points:	30
Description:	This unit involves the skills and knowledge required to install and commission photovoltaic (PV) power conversion equipment (PCE) to grid. It includes working safely to industry installation standards, installing components in accordance with design, placing and securing system components accurately, making required circuit connections, testing and commissioning the installation and completing the necessary installation documentation. The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations, which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.). Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, is required. Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations. Note: Those holding an Unrestricted Electricianâ€™s Licence or equivalent issued in an Australian state or territory meet the prerequisite requirements of UEEEL0012 Install low voltage wiring, appliances, switchgear and associated accessories. All other prerequisite requirements must be met.
Prerequisites:	UEEEL0012 Install low voltage wiring, appliances, switchgear and associated accessories UEERE0054 Conduct site survey for grid-connected photovoltaic and battery storage systems

UEERE0049 Apply safe work practices in the rooftop solar industry

CIT Code:	ELEC1592
Cost:	Apprentice $100.00
Credit Points:	20
Description:	This unit involves the skills and knowledge required to apply safe work practices in the rooftop solar industry. It includes identifying health and safety legislation, regulations, standards, codes of practice and workplace requirements and their application to relevant workplace tasks. It also includes working safely at heights, safe manual handling of solar components, asbestos and silica awareness. Work is performed by teams of two or more persons to install and repair domestic or commercial solar rooftop systems. The application of the skills and knowledge described in this unit may require a licence, registration or certification to practice in the workplace. Other conditions may also apply under state and territory legislative and regulatory licensing requirements which must be confirmed prior to commencing this unit.
Prerequisites:	Nil

HLTAID011 Provide first aid

CIT Code:	HESC586
Cost:	Apprentice $40.00
Credit Points:	10
Description:	This unit describes the skills and knowledge required to provide a first aid response to a casualty in line with first aid guidelines determined by the Australian Resuscitation Council (ARC) and other Australian national peak clinical bodies. The unit applies to all persons who may be required to provide a first aid response in a range of situations, including community and workplace settings. Specific licensing/regulatory requirements relating to this competency, including requirements for refresher training should be obtained from the relevant national/state/territory Work Health and Safety Regulatory Authorities.
Prerequisites:	Nil

HLTAID010 Provide basic emergency life support

CIT Code:	HESC587
Cost:	Apprentice $29.00
Credit Points:	10
Description:	This unit describes the skills and knowledge required to recognise and respond to life-threatening emergencies in line with first aid guidelines determined by the Australian Resuscitation Council (ARC) and other Australian national peak clinical bodies. This unit applies to all persons who may be required to provide an emergency response in a range of situations, including community and workplace settings. Specific licensing/regulatory requirements relating to this competency, including requirements for refresher training should be obtained from the relevant national/state/territory Work Health and Safety Regulatory Authorities.
Prerequisites:	Nil

UEERE0081 Install photovoltaic systems to power conversion equipment

CIT Code:	ELEC1596
Cost:	Apprentice $125.00
Credit Points:	30
Description:	This unit involves the skills and knowledge required to install and commission a photovoltaic (PV) power system to power conversion equipment (PCE). It includes working safely to industry installation standards, matching PV components specified for a given location, placing and securing system components accurately, making required circuit connections and completing the necessary installation documentation. The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations, which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.). Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, is required. Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations. Note: Those holding an Unrestricted Electricianâ€™s Licence or equivalent issued in an Australian state or territory meet the prerequisite requirements of UEEEL0012 Install low voltage wiring, appliances, switchgear and associated accessories. All other prerequisite requirements must be met.
Prerequisites:	UEEEL0012 Install low voltage wiring, appliances, switchgear and associated accessories UEERE0054 Conduct site survey for grid-connected photovoltaic and battery storage systems

Stage 4 Core - Complete all 100 cr points

UEECO0023 Participate in electrical work and competency development activities

CIT Code:	ELEC1407
Cost:	Apprentice $45.00
Credit Points:	60
Description:	This unit involves the skills and knowledge required to participate in electrical work and related activities that contribute to the ongoing development of competency.It includes complying with electrical industry and organisational policies and procedures, undertaking work and related activities in accordance with a competency development plan, documenting and periodically reporting work activities, and participating in periodic reviews to monitor one's own competency development.Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, may be required.Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.Those holding an 'Unrestricted Electrician's Licence' or equivalent issued in an Australian state or territory meet the requirements of this unit.
Prerequisites:	Nil

UEEEL0039 Design, install and verify compliance and functionality of general electrical installations

CIT Code:	ELEC1497
Cost:	Apprentice $180.00
Credit Points:	40
Description:	This unit involves the skills and knowledge required to design, install, inspect and test to verify an electrical installation is safe and complies with regulatory requirements.It includes working safely; designing, installing, commissioning and fault finding of electrical installations; visual inspections and mandatory testing; following workplace procedures; and completing mandatory reporting requirements.The skills and knowledge described in this unit require a licence or permit to practice in the workplace where work is carried out on electrical installations which are designed to operate at voltages greater than 50 volt (V) alternating current (a.c.) or 120 V direct current (d.c.). Competency development activities in this unit are subject to regulations directly related to licensing. Where a licence or permit to practice is not held, a relevant contract of training, such as an Australian Apprenticeship, may be required.Additional and/or other conditions may apply in some jurisdictions subject to regulations related to electrical work. Practice in the workplace and during training is also subject to work health and safety (WHS)/occupational health and safety (OHS) regulations.Those holding an 'Unrestricted Electrician's Licence' or equivalent issued in an Australian state or territory meet the requirements of this unit and its prerequisite requirements.A 'licensed electrician' who requires this unit to demonstrate currency for regulatory purposes may be required to undertake this unit to demonstrate their currency with verification of compliance requirements. In this case they are deemed to have met the prerequisites for this unit provided that they hold a current 'electricians licence' or its equivalent issued in an Australian state or territory; and, have recently been in employment as a licensed electrician sufficient to evidence current knowledge of applicable standards and regulations.
Prerequisites:	HLTAID001 Provide cardiopulmonary resuscitation UEECD0007 Apply work health and safety regulations, codes and practices in the workplace UEECD0016 Document and apply measures to control WHS risks associated with electrotechnology work UEECD0019 Fabricate, assemble and dismantle utilities industry components UEECD0020 Fix and secure electrotechnology equipment UEECD0044 Solve problems in multiple path circuits UEECD0046 Solve problems in single path circuits UEECD0051 Use drawings, diagrams, schedules, standards, codes and specifications UEEEL0003 Arrange circuits, control and protection for electrical installations UEEEL0005 Develop and connect electrical control circuits UEEEL0008 Evaluate and modify low voltage heating equipment and controls UEEEL0009 Evaluate and modify low voltage lighting circuits, equipment and controls UEEEL0010 Evaluate and modify low voltage socket outlets circuits UEEEL0012 Install low voltage wiring, appliances, switchgear and associated accessories UEEEL0014 Isolate, test and troubleshoot low voltage electrical circuits UEEEL0018 Select wiring systems and select cables for low voltage electrical installations UEEEL0019 Solve problems in direct current (d.c.) machines UEEEL0020 Solve problems in low voltage a.c. circuits UEEEL0021 Solve problems in magnetic and electromagnetic devices UEEEL0023 Terminate cables, cords and accessories for low voltage circuits UEEEL0024 Test and connect alternating current (a.c.) rotating machines UEEEL0025 Test and connect transformers UEEEL0047 Identify shut down and restart systems with alternate supplies UETTDRRF06 Perform rescue from a live LV panel

Related Courses

Certificate III	Air Conditioning and Refrigeration UEE32220
Statement Attainment	Designer-Installer Grid-connected Photovoltaic Systems

More Information

For more information about this course please contact CIT Student Services on (02) 6207 3188 or email infoline@cit.edu.au

Trades