Overview
This program provides training for plumbing apprentices and covers installing, altering and repairing pipework services for hot and cold water supply, gas supply, sewerage, waste water and rain water disposal. It also covers the installation of metal roofing, gutters, downpipes and flashings.
| Qualification: |
Certificate III in Plumbing CPC32413 |
| Program No: |
C3-TS01 |
| Campus: |
CIT Fyshwick |
| Duration: |
6 Semesters part time (approx. 8 hours per week). |
| Cost Info: |
The 2019 Semester 1 enrolment fees for this course are based on the costs per subject as indicated below. The total program cost may vary depending on the choice of elective subjects or if subjects are attempted more than once.
Subject costs identified as Standard are partially subsidised by the ACT Government. Concessions may be available to eligible students.
Costs identified as Apprentice or Trainee apply only to students studying as part of an Australian Apprenticeship arrangement. The qualification cost for an Apprentice or Trainee is subsidised by the ACT Government. Concessions may be available to eligible Apprentices or Trainees.
Costs identified as Full Fee receive no government subsidy. Concessions are not available.
Further information about fees is available at Course fees and assistance.
Information about studying under Skilled Capital is also available. |
| Indicative Cost: |
$2,505
Apprentice/Trainee $1,790 |
| Likely Job Outcome: |
Plumber, plumber-drainer and gasfitter, roof plumber, plumber-drainer, plumber-gasfitter. |
| Enrolment Type: |
Apprentice/Trainee |
| Share: |
|
Additional Information
You will need to provide your own protective clothing and equipment including full-length overalls, safety glasses, welding goggles, welding gloves, hearing protection and safety boots.
Elective streams at CIT include; water, gas, sanitary, draining and roofing. You will complete 5 elective streams instead of the minimum training package requirements of 4 during your apprenticeship. It is an ACT licencing requirement for a journey person plumber, drainer, gas fitter licence holder to successfully complete the additional roofing stream
On successful completion, graduates may apply for a Plumbers licence (Journeyperson) in the ACT to work fully qualified. This licence is issued by the Construction Occupations Registrar of Access Canberra (ACT Government). CIT does not issue this licence.
Entry Requirements / How to Apply
As you are entering this program as an apprentice under the Australian Apprenticeships arrangements, you must be employed in the industry and you must register with an Apprentice Network Provider (ANP) prior to enrolment.
Prior to commencing your training at CIT, you will be required to undertake a Language, Literacy and Numeracy (LLN) assessment to help identify areas where you may require additional assistance to achieve your qualification.
To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).
Literacy Skills Information
We suggest that you will need Australian Core Skills Framework levels of at least 2 across reading, writing, learning, oral communication and, depending on your program of study, numeracy skills to successfully complete this program. If you do not have this level, you can still enrol and seek support to improve your skills or you may prefer to begin with a lower level program, or enrol in the Certificate I in Skills for Vocational Pathways (FSK10213) to develop your literacy skills. Please visit Foundation Skills or phone (02) 6207 4872 to have a chat to one of our teachers.
Transition Information
Qualifications at CIT are regularly updated or replaced to meet current industry needs and maximise your employment opportunities. If this occurs while you are part way through a qualification, you may need to vary your learning to meet the new national requirements. CIT will aim to make this as smooth as possible for you.
Subject Cancellations/Changes
To ensure positive outcomes for all students, CIT may need to cancel or change classes at short notice. CIT will make every effort to inform students as soon as changes are made and will also make every effort to offer alternative arrangements for students to meet the requirements of the subject and complete their qualification. In an unfortunate instance when this cannot be met, you will receive a full refund. Please ensure you maintain current contact details via CIT Self Service or by contacting CIT Student Services at infoline@cit.edu.au.
Subject Information
Stage 1 - complete all 21
- CPCCOHS2001A
Apply OHS requirements, policies and procedures in the
construction industry
-
| CIT Code: |
OHSS249 |
| Cost: |
Standard $43.00
Apprentice $20.00 |
| Description: |
This unit of competency specifies the outcomes required to carry
out OHS requirements through safe work practices at any on or off-site
construction workplace. It requires the performance of work in a safe
manner through awareness of risks and work requirements, and the
planning and performance of safe work practices with concern for
personal safety and the safety of others. |
| Prerequisites: |
Nil |
- CPCCCM2008B
Erect and dismantle restricted height scaffolding
-
| CIT Code: |
CNST406 |
| Cost: |
Standard $86.00
Apprentice $20.00 |
| Description: |
This unit of competency specifies the outcomes required to erect
and dismantle restricted height scaffolding to provide work platforms
for various occupational applications. It includes placement of safety
barriers and only involves modular scaffolding restricted to a height
of 4 metres. |
| Prerequisites: |
CPCCOHS2001A Apply OHS requirements, policies and procedures in
the construction industry |
- CPCCCM2010B
Work safely at heights
-
| CIT Code: |
CNST565 |
| Cost: |
Standard $21.50
Apprentice $20.00 |
| Description: |
This unit of competency specifies the outcomes required to work
safely on construction sites where the work activity involves working
above 1.5 metres from ground level and where fall protection measures
are required. |
| Prerequisites: |
CPCCOHS2001A Apply OHS requirements, policies and procedures in
the construction industry |
- CPCPCM2039A
Carry out interactive workplace communication
-
| CIT Code: |
PLMB473 |
| Cost: |
Standard $21.50
Apprentice $10.00 |
| Description: |
This unit of competency specifies the outcomes required to
communicate effectively through oral, visual and written means of
communication in order to facilitate work practices that are safe,
meet specifications and provide quality outcomes. |
| Prerequisites: |
Nil |
- CPCPCM2041A
Work effectively in the plumbing and services sector
-
| CIT Code: |
PLMB475 |
| Cost: |
Standard $32.25
Apprentice $15.00 |
| Description: |
This unit of competency specifies the outcomes required to prepare
for and sustain effective work within the plumbing and services sector
of the building and construction industry. It requires the ability to
accept instructions, work with others, plan activities and perform
tasks, as well as participate in workplace planning and meetings.
Outcomes include effective participation in a plumbing and services
workplace to promote a harmonious and efficient work environment. The
unit covers the identification and clarification of the sector work
context and setting, acceptance of workplace responsibility by the
individual, working in a team, individual career path improvement and
participation in meetings. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- HLTFA211A
Provide basic emergency life support
-
| CIT Code: |
HESC464 |
| Cost: |
Standard $32.25
Apprentice $20.00 |
| Description: |
This unit of competency describes the skills and knowledge
required to recognise and respond to life threatening emergencies
using basic life support measures only |
| Prerequisites: |
Nil |
- CPCPCM2043A
Carry out WHS requirements
-
| CIT Code: |
PLMB476 |
| Cost: |
Standard $107.50
Apprentice $15.00 |
| Description: |
This unit of competency specifies the outcomes required to carry
out work health and safety (WHS) requirements through safe work
practices in a plumbing and services work environment. The unit
requires the performance of work in a safe manner through awareness of
risks, work requirements and the planning and performance of safe work
practices with concern for personal safety and the safety of others.
It includes the initial response to workplace emergencies; the safe
use of electricity; the identification of hazardous materials,
including asbestos; and compliance with legislated work safety
practices. |
| Prerequisites: |
Nil |
- CPCPCM2045A
Handle and store plumbing materials
-
| CIT Code: |
PLMB477 |
| Cost: |
Standard $21.50
Apprentice $15.00 |
| Description: |
This unit of competency specifies the outcomes required to safely
handle and store plumbing materials and to identify and address
environmental concerns and associated hazards, including the disposal
of waste. It addresses work health and safety (WHS) and environmental
requirements to minimise risk to the health and safety of personnel
and to the environment. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPCM2046A
Use plumbing hand and power tools
-
| CIT Code: |
PLMB478 |
| Cost: |
Standard $86.00
Apprentice $15.00 |
| Description: |
This unit of competency specifies the outcomes required to use
commonly used hand and power tools in plumbing work applications.
|
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPCM2048A
Cut and join sheet metal
-
| CIT Code: |
PLMB480 |
| Cost: |
Standard $21.50
Apprentice $15.00 |
| Description: |
This unit of competency specifies the outcomes required to cut and
join sheet metal associated with the fabrication, installation and
repair functions of the plumbing sector. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPCM2050A
Mark out materials
-
| CIT Code: |
PLMB482 |
| Cost: |
Standard $43.00
Apprentice $15.00 |
| Description: |
This unit of competency specifies the outcomes required to mark
out plumbing materials prior to fabricating piping, steel sections,
ducting and sheet materials, roofing and cladding. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPCM2052A
Weld using oxy-acetylene equipment
-
| CIT Code: |
PLMB483 |
| Cost: |
Standard $43.00
Apprentice $30.00 |
| Description: |
This unit of competency specifies the outcomes required to
weld/braze metals associated with the fabrication, installation and
repair of plumbing components and systems, using oxy-acetylene
equipment. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPCM2053A
Weld using manual metal arc welding equipment
-
| CIT Code: |
PLMB484 |
| Cost: |
Standard $43.00
Apprentice $30.00 |
| Description: |
This unit of competency specifies the outcomes required to weld
metals associated with the fabrication and installation of plumbing
components, using manual metal arc welding equipment. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPCM2055A
Work safely on roofs
-
| CIT Code: |
PLMB486 |
| Cost: |
Standard $43.00
Apprentice $15.00 |
| Description: |
This unit of competency specifies the outcomes required to perform
safe work practices when undertaking plumbing work on roofing
structures. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCCCM3001C
Operate elevated work platforms
-
| CIT Code: |
CNST189 |
| Cost: |
Standard $75.25
Apprentice $20.00 |
| Description: |
This unit of competency specifies the outcomes required to safely
and effectively operate some types of elevated work platforms (EWPs)
in a variety of different terrains and situations to access isolated
work areas. The unit includes locating, setting up, operating and
shutting down EWPs. In addition to achievement of this competency, an
EWP operator may need to obtain additional certification of training
and experience before being allowed to operate the equipment. |
| Prerequisites: |
CPCCCM2010B Work safely at heights
CPCCOHS2001A Apply OHS
requirements, policies and procedures in the construction
industry |
- CPCPWT3020A
Connect and install storage tanks to a domestic water supply
-
| CIT Code: |
PLMB576 |
| Cost: |
Standard $32.25
Apprentice $25.00 |
| Description: |
This unit of competency specifies the outcomes required to connect
and install storage tanks to a domestic water supply. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPWT3021A
Set out and install water services
-
| CIT Code: |
PLMB577 |
| Cost: |
Standard $86.00
Apprentice $25.00 |
| Description: |
This unit of competency specifies the outcomes required to install
heated, cold and tempered water services from the water supply to the
fixture or points of discharge and storage. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPWT3022A
Install and adjust water service controls and devices
-
| CIT Code: |
PLMB578 |
| Cost: |
Standard $32.25
Apprentice $25.00 |
| Description: |
This unit of competency specifies the outcomes required to install
water service controls and mixing devices used to manually control
water mix and flow. It includes the basic adjustment and maintenance
of correct flow operation for flushing devices, control valves,
temperature control devices pumps and appliances, and excludes the
commissioning and adjustment of backflow prevention devices and
thermostatic mixing valves. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPCM3023A
Fabricate and install non-ferrous pressure piping
-
| CIT Code: |
PLMB489 |
| Cost: |
Standard $32.25
Apprentice $30.00 |
| Description: |
This unit of competency specifies the outcomes required to
determine installation requirements and to fabricate, install and test
non-ferrous pressure pipe. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPWT3023A
Install and commission water heating systems
-
| CIT Code: |
PLMB579 |
| Cost: |
Standard $53.75
Apprentice $25.00 |
| Description: |
This unit of competency specifies the outcomes required to install
and commission water heaters for domestic and commercial applications.
|
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPWT3025A
Install water pump sets
-
| CIT Code: |
PLMB581 |
| Cost: |
Standard $21.50
Apprentice $25.00 |
| Description: |
This unit of competency specifies the outcomes required to install
and test water pumps. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
Stage 2 - complete all 22
- CPCPCM2047A
Carry out levelling
-
| CIT Code: |
PLMB479 |
| Cost: |
Standard $21.50
Apprentice $20.00 |
| Description: |
This unit of competency specifies the outcomes required to plan
and use levelling equipment to establish, record and apply those
levels to the plumbing and services industry. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPCM2054A
Carry out simple concreting and rendering
-
| CIT Code: |
PLMB485 |
| Cost: |
Standard $43.00
Apprentice $40.00 |
| Description: |
This unit of competency specifies the outcomes required to perform
minor repairs and undertake minor concreting and rendering tasks.
|
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPSN3011B
Plan layout of a residential sanitary plumbing system
-
| CIT Code: |
PLMB396 |
| Cost: |
Standard $21.50
Apprentice $40.00 |
| Description: |
This unit of competency specifies the outcomes required to plan
the layout, size and install a sanitary plumbing system for
residential buildings. |
| Prerequisites: |
Nil |
- CPCPSN3022A
Install discharge pipes
-
| CIT Code: |
PLMB571 |
| Cost: |
Standard $64.50
Apprentice $40.00 |
| Description: |
This unit of competency specifies the outcomes required to install
pipework from soil and wastewater fixtures to a stack or drain. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPSN3023A
Fabricate and install sanitary stacks
-
| CIT Code: |
PLMB572 |
| Cost: |
Standard $64.50
Apprentice $40.00 |
| Description: |
This unit of competency specifies the outcomes required to
fabricate and install sanitary stacks for soil and waste discharges.
|
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPSN3024A
Install and fit off sanitary fixtures
-
| CIT Code: |
PLMB573 |
| Cost: |
Standard $43.00
Apprentice $40.00 |
| Description: |
This unit of competency specifies the outcomes required to install
and fit off sanitary fixtures. It applies to the installation of
sanitary plumbing, including the connection of discharge pipes to
sanitary plumbing and drainage, including soil and waste fixtures.
|
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPWT3026A
Fit off and commission heated and cold water services
-
| CIT Code: |
PLMB582 |
| Cost: |
Standard $43.00
Apprentice $40.00 |
| Description: |
This unit of competency specifies the outcomes required to fit off
and commission heated and cold water services to appropriate fixtures.
It includes the provision for non-drinkable water applications. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPCM3022A
Weld polyethylene and polypropylene pipes using fusion method
-
| CIT Code: |
PLMB488 |
| Cost: |
Standard $21.50
Apprentice $25.00 |
| Description: |
This unit of competency specifies the outcomes required to fusion
weld polyethylene (PE) and polypropylene (PP) (approved as per
Australian standards) polymer pipes, and test joints in polymer pipe
up to DN100 for water, sanitary and stormwater application only.
|
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPDR2021A
Locate and clear blockages
-
| CIT Code: |
PLMB499 |
| Cost: |
Standard $21.50
Apprentice $26.00 |
| Description: |
This unit of competency specifies the outcomes required to locate
and clear blockages to sanitary plumbing and drainage with the use of
mechanically operated drain clearing machines and attachments, closed
circuit television (CCTV) and manually operated drain cleaning tools
and equipment where required. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPDR2022A
Install domestic treatment plants
-
| CIT Code: |
PLMB500 |
| Cost: |
Standard $43.00
Apprentice $26.00 |
| Description: |
This unit of competency specifies the outcomes required to install
approved prefabricated domestic treatment plants. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPDR2024A
Install stormwater and sub-soil drainage systems
-
| CIT Code: |
PLMB502 |
| Cost: |
Standard $32.25
Apprentice $26.00 |
| Description: |
This unit of competency specifies the outcomes required to install
stormwater and sub-soil drainage systems to an approved point of
discharge. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPDR2025A
Drain work site
-
| CIT Code: |
PLMB503 |
| Cost: |
Standard $21.50
Apprentice $26.00 |
| Description: |
This unit of competency specifies the outcomes required to remove
water from a work site, either temporarily or permanently, through
stormwater and sub-soil drainage systems. It includes the installation
of submersible and non-submersible type pumps, suitable for pumping
unscreened roof water, sub-soil water and surface water. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPDR2026A
Install prefabricated inspection openings and enclosures
-
| CIT Code: |
PLMB504 |
| Cost: |
Standard $21.50
Apprentice $26.00 |
| Description: |
This unit of competency specifies the outcomes required to install
prefabricated inspection openings and enclosures. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPDR3021A
Plan layout of a residential sanitary drainage system
-
| CIT Code: |
PLMB505 |
| Cost: |
Standard $21.50
Apprentice $26.00 |
| Description: |
This unit of competency specifies the outcomes required to plan
the layout of sanitary drainage systems for residential buildings.
|
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPDR3022A
Install below ground sanitary drainage systems
-
| CIT Code: |
PLMB506 |
| Cost: |
Standard $64.50
Apprentice $26.00 |
| Description: |
This unit of competency specifies the outcomes required to install
below ground sanitary drainage systems for sewage and waste discharge
from sanitary fixtures to the authorities' approved point of
connection. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPDR3023A
Install on-site disposal systems
-
| CIT Code: |
PLMB507 |
| Cost: |
Standard $21.50
Apprentice $26.00 |
| Description: |
This unit of competency specifies the outcomes required to install
an on-site effluent disposal system from a domestic treatment plant.
|
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- RIICCM210D
Install trench support
-
| CIT Code: |
CNST405 |
| Cost: |
Standard $43.00
Apprentice $20.00 |
| Description: |
This unit describes a participant?s skills and knowledge required
to install trench support in Civil construction. This unit is
appropriate for those working in operational roles. Licensing,
legislative, regulatory and certification requirements that apply to
this unit can vary between states, territories, and Industry sectors.
|
| Prerequisites: |
Nil |
- CPCPDR2023A
Maintain effluent disinfection systems
-
| CIT Code: |
PLMB501 |
| Cost: |
Standard $21.50
Apprentice $27.00 |
| Description: |
This unit of competency supports development of skills to maintain
a range of effluent treatment systems. Site location for work
application may be domestic and may be a new work site or an existing
structure being renovated, extended, restored or maintained. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPSN3025A
Install pre-treatment facilities
-
| CIT Code: |
PLMB574 |
| Cost: |
Standard $21.50
Apprentice $26.00 |
| Description: |
This unit of competency specifies the outcomes required to install
pre-treatment facilities designed to intercept and retain prohibited
discharges to the sanitary plumbing and drainage system. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPFS3031A
Fabricate and install fire hydrant and hose reel systems
-
| CIT Code: |
PLMB510 |
| Cost: |
Standard $86.00
Apprentice $40.00 |
| Description: |
This unit of competency specifies the outcomes required to
fabricate and install fire hydrant and hose reel systems. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPWT3027A
Connect irrigation systems from drinking water supply
-
| CIT Code: |
PLMB583 |
| Cost: |
Standard $21.50
Apprentice $40.00 |
| Description: |
This unit of competency specifies the outcomes required to connect
irrigation and watering systems from a drinking water supply. It does
not include the commissioning of backflow prevention devices or
arrangements. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPCM2040A
Read plans and calculate plumbing quantities
-
| CIT Code: |
PLMB474 |
| Cost: |
Standard $21.50
Apprentice $34.00 |
| Description: |
This unit of competency specifies the outcomes required to use and
interpret plans and specifications associated with construction work,
and accurately complete measurements and calculations to establish
quantities of materials for the plumbing and services industry. The
unit requires the interpretation of plans, drawings and specifications
to interpret requirements, and making measurements and calculations to
determine quantities of plumbing materials. |
| Prerequisites: |
Nil |
Stage 3 - complete all 19
- CPCPGS3046A
Install LPG systems in caravans, mobile homes and mobile
workplaces
-
| CIT Code: |
PLMB524 |
| Cost: |
Standard $32.25
Apprentice $30.00 |
| Description: |
This unit of competency specifies the outcomes required to
determine the requirements for installing and commissioning liquefied
petroleum gas (LPG) systems with an operating pressure not exceeding
2.75kPa in caravans, mobile homes and mobile workplaces. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPGS3047A
Install LPG systems in marine craft
-
| CIT Code: |
PLMB525 |
| Cost: |
Standard $32.25
Apprentice $30.00 |
| Description: |
This unit of competency specifies the outcomes required to
determine the requirements for, and install and commission, gas
detection systems and liquefied petroleum gas (LPG) systems with an
operating pressure not exceeding 2.75kPa in marine craft |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPGS3048A
Install gas pressure control equipment
-
| CIT Code: |
PLMB526 |
| Cost: |
Standard $21.50
Apprentice $35.00 |
| Description: |
This unit of competency specifies the outcomes required to install
and commission gas control and regulating equipment for consumer gas
piping carrying natural gas (NG), liquefied petroleum gas (LPG), or
tempered liquefied petroleum gas (TLPG) up to 200kPa. This unit
requires the determination of the requirements for gas control and
regulating equipment (for pressures up to 200kPa), and its
installation, testing and commissioning according to standards. The
design requirements of this unit are limited to the application of the
design to layout and installation. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPGS3049A
Install Type A gas appliance flues
-
| CIT Code: |
PLMB527 |
| Cost: |
Standard $32.25
Apprentice $30.00 |
| Description: |
This unit of competency specifies the outcomes required to install
and test flues for Type A gas appliances. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPGS3051A
Purge consumer piping
-
| CIT Code: |
PLMB529 |
| Cost: |
Standard $21.50
Apprentice $30.00 |
| Description: |
This unit of competency specifies the outcomes required to purge
consumer gas piping systems. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPGS3053A
Disconnect and reconnect Type A gas appliances
-
| CIT Code: |
PLMB531 |
| Cost: |
Standard $43.00
Apprentice $30.00 |
| Description: |
This unit of competency specifies the outcomes required to
disconnect and reconnect services from Type A gas appliances operating
on natural gas (NG), or liquefied petroleum gas (LPG), or tempered
liquefied petroleum gas (TLPG) up to 200kPa. The work is confined to
disconnecting and reconnecting a like appliance. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPGS3054A
Calculate and install natural ventilation for Type A gas
appliances
-
| CIT Code: |
PLMB532 |
| Cost: |
Standard $21.50
Apprentice $30.00 |
| Description: |
This unit of competency specifies the outcomes required to
calculate and install natural ventilation for Type A gas appliances
operating on natural gas (NG), liquefied petroleum gas (LPG) or
tempered liquefied petroleum gas (TLPG) not exceeding 200kPa. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPGS3056A
Install gas piping systems
-
| CIT Code: |
PLMB534 |
| Cost: |
Standard $53.75
Apprentice $35.00 |
| Description: |
This unit of competency specifies the outcomes required to select,
install and test gas consumer piping carrying natural gas (NG),
liquefied petroleum gas (LPG), or tempered liquefied petroleum gas
(TLPG) up to 200kPa. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPGS3057A
Size consumer gas piping systems
-
| CIT Code: |
PLMB535 |
| Cost: |
Standard $21.50
Apprentice $30.00 |
| Description: |
This unit of competency specifies the outcomes required to size
consumer gas piping carrying natural gas (NG), liquefied petroleum gas
(LPG) or tempered liquefied petroleum gas (TLPG) not exceeding 200kPa.
|
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPGS3059A
Install LPG storage of aggregate storage capacity up to 500
litres
-
| CIT Code: |
PLMB537 |
| Cost: |
Standard $53.75
Apprentice $30.00 |
| Description: |
This unit of competency specifies the outcomes required to select,
locate, install and test liquefied petroleum gas (LPG) storage
facilities with a storage capacity of up to 500 litres; install either
single or multiple cylinders; and test associated piping systems. The
storage is connected to consumer piping systems with operating
pressures not exceeding 200kPa. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPGS3061A
Install and commission type A gas appliances
-
| CIT Code: |
PLMB589 |
| Cost: |
Standard $64.50
Apprentice $30.00 |
| Description: |
This unit of competency specifies the outcomes required to install
and commission Type A gas appliances approved for use with natural gas
(NG) or liquefied petroleum gas (LPG) up to 200kPa. Type A gas
appliances are badged appliances of less than 500 megajoules (MJ) for
which an approval scheme exists. They include but are not limited to
space heaters, ducted heating systems, heated water storage, instant
heated water heaters, decorative heaters, and gas stoves and hot
plates. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPCM3021A
Flash penetrations through roofs and walls
-
| CIT Code: |
PLMB487 |
| Cost: |
Standard $43.00
Apprentice $42.50 |
| Description: |
This unit of competency specifies the outcomes required to set
out, cut and flash a roof and wall penetration. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPRF2022A
Select and install roof sheeting and wall cladding
-
| CIT Code: |
PLMB562 |
| Cost: |
Standard $43.00
Apprentice $42.50 |
| Description: |
This unit of competency specifies the outcomes required to select
and install roof sheeting, steel battens and wall cladding for roofs.
It includes the selection and installation of non-metallic roof
materials associated with metal roofing (excluding roof tiles and
slate) and of insulation materials. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPRF2023A
Collect and store roof water
-
| CIT Code: |
PLMB563 |
| Cost: |
Standard $21.50
Apprentice $42.50 |
| Description: |
This unit of competency specifies the outcomes required to
determine storage requirements and to plan, prepare and install
storage tanks and related piping for the collection and storage of
roof water. The unit requires the installation of water storage tanks
of at least 1000 litres capacity. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPRF3021A
Receive roofing materials
-
| CIT Code: |
PLMB565 |
| Cost: |
Standard $21.50
Apprentice $42.50 |
| Description: |
This unit of competency specifies the outcomes required to
coordinate the delivery, receipt and handling of roofing materials on
a site. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPRF3022A
Fabricate and install roof drainage components
-
| CIT Code: |
PLMB566 |
| Cost: |
Standard $107.50
Apprentice $42.50 |
| Description: |
This unit of competency specifies the outcomes required to
fabricate and install roof drainage components and rainwater goods for
commercial and residential roof systems. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPRF3023A
Fabricate and install external flashings
-
| CIT Code: |
PLMB567 |
| Cost: |
Standard $43.00
Apprentice $42.50 |
| Description: |
This unit of competency specifies the outcomes required to
fabricate and install external flashings for roof and ceiling
installations. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPRF3024A
Install roof components
-
| CIT Code: |
PLMB568 |
| Cost: |
Standard $21.50
Apprentice $42.50 |
| Description: |
This unit of competency specifies the outcomes required to select
and install industrial type roofing components in roofs. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
- CPCPRF3026A
Install composite roof systems
-
| CIT Code: |
PLMB570 |
| Cost: |
Standard $43.00
Apprentice $42.50 |
| Description: |
This unit of competency specifies the outcomes required to install
roof sheets for composite roof systems. |
| Prerequisites: |
CPCPCM2043A Carry out WHS
requirements |
Related Courses
More Information
For more information about this course please contact CIT Student Services on (02) 6207 3188 or email infoline@cit.edu.au
Study at CIT 
Current Students 
Industry/Business