Skip to Content
Need Help Live Chat
Certificate III in Painting and Decorating CPC30620

Overview

This qualification provides a trade outcome in painting and decorating for residential and commercial construction work. This qualification is suitable for an Australian Apprenticeship pathway.

Qualification:

Certificate III in Painting and Decorating CPC30620

Course No:

C3-TS29

Campus:

CIT Bruce 

Duration:

Five semesters part-time (five blocks each semester with a block being three days every three weeks). Duration may vary depending on the individual's progress through competencies.

Cost Info:

Further information about fees is available at Course fees and assistance

Indicative Cost:

Apprentice/Trainee
  • Subsidised fee $1,905

Likely Job Outcome:

Painter and decorator.

Application Type:

Register Your Interest
Share:

Additional Information

You will need to provide clothing and appropriate safety footwear suitable for working on a construction site and personal protective equipment (PPE) such as safety glasses, dust masks and hearing protection.

Completion of the general induction training course specified by the National Code of Practice for Induction Training for Construction Work (ASCC 2007) is required before entering a construction work site. Achievement of unit CPCCWHS1001 Prepare to work safely in the construction industry covers this requirement.

Licensing, legislative and regulatory or certification requirements for painting and decorating work differ between States and Territories. Please consult with the relevant regulatory authority

Entry Requirements

If you are entering this course as an Apprentice under the Australian Apprenticeships arrangements, you must be employed in the industry and you must register with an Apprentice Network Provider (ANP) prior to enrolment. CIT will conduct an interview prior to the commencement of study to discuss:
- Previous experience – recognition of prior learning
- Training plan
- Support services/LLN
- Roles and responsibilities of all parties

Skills Recognition

To study any course at CIT (excluding non-accredited training) you must have a Unique Student Identifier (USI).

Literacy Skills Information

We suggest that you will need Australian Core Skills Framework literacy levels of at least 3 across reading, writing, learning, oral communication and, depending on your course of study, numeracy skills to successfully complete this course. If you do not have this level, you can still enrol and seek support to improve your skills or you may prefer to begin with the lower level course. Please visit Foundation Skills.

Transition Information

Qualifications at CIT are regularly updated or replaced to meet current industry needs and maximise your employment opportunities. If this occurs while you are part way through a qualification, you may need to vary your learning to meet the new national requirements. CIT will aim to make this as smooth as possible for you.

Subject Cancellations/Changes

To ensure positive outcomes for all students, CIT may need to cancel or change classes at short notice. CIT will make every effort to inform students as soon as changes are made and will also make every effort to offer alternative arrangements for students to meet the requirements of the subject and complete their qualification. In an unfortunate instance when this cannot be met, you will receive a full refund. Please ensure you maintain current contact details via CIT Self Service or by contacting CIT Student Services at infoline@cit.edu.au.


Subject Information

Complete 29 subjects (26 Core and 3 Electives)

Stage 1/Block 1 - Complete all 9

  • CPCCPD2011   Handle and store painting and decorating materials
    • CIT Code: CNST945
      Cost: Standard $30.00
      Description: This unit of competency specifies the skills and knowledge required to handle, sort and store painting and decorating materials. The unit includes handling, sorting, storing, protecting and distributing materials and cleaning-up.The unit is suitable for those with basic skills and knowledge undertaking routine work tasks under the direction of more experienced workers.Completion of the general construction industry training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCCWHS1001 Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
  • CPCCOM1014   Conduct workplace communication
    • CIT Code: CNST850
      Cost: Standard $20.00
      Description: This unit of competency specifies the skills and knowledge required to communicate effectively with other workers in a construction workplace environment. The unit is suitable for those with basic skills and knowledge undertaking routine work tasks under the direction of more experienced workers.No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • CPCCPD2012   Use painting and decorating tools and equipment
    • CIT Code: CNST946
      Cost: Standard $60.00
      Description: This unit of competency specifies the skills and knowledge required to select, use, store and maintain a range of commonly used painting and decorating tools and equipment.The unit is suitable for those with basic skills and knowledge undertaking routine work tasks under the direction of more experienced workers.Completion of the general construction industry training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCCWHS1001Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
  • CPCCWHS2001   Apply WHS requirements, policies and procedures in the construction industry
    • CIT Code: CNST843
      Cost: Standard $20.00
      Description: This unit specifies the outcomes required to carry out work health and safety (WHS) requirements through safe work practices in all on- or off-site construction workplaces. It requires the performance of work in a safe manner through awareness of risks and work requirements, and the planning and performance of safe work practices with concern for personal safety and the safety of others. The unit covers fundamental WHS requirements necessary to undertake work tasks within any sector in the construction industry. It includes the identification of hazardous materials, including asbestos, and compliance with legislated work safety practices. It does not cover removal of asbestos, which is a licensed activity. It applies to workers in the construction industry. This unit also relates directly to the general construction induction training requirements of the Model Work Health and Safety Regulations 2011 and relevant occupational health and safety regulations for Victoria and for Western Australia. Achievement of CPCCWHS1001 Prepare to work safely in the construction industry covers these induction training requirements.
      Prerequisites: Nil
  • CPCCOM1013   Plan and organise work
    • CIT Code: CNST849
      Cost: Standard $20.00
      Description: This unit of competency specifies the skills and knowledge required to plan and organise basic individual and group work activities on a construction site.The unit is suitable for those with basic skills and knowledge undertaking routine work tasks under the direction of more experienced workers.No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • CPCCOM1015   Carry out measurements and calculations
    • CIT Code: CNST851
      Cost: Standard $45.00
      Description: This unit of competency specifies the skills and knowledge required to plan and undertake basic measurements and calculations to determine task and material requirements in a construction work environment.A person working at this level would be expected to complete tasks assigned to them, under supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCCWHS1001 Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil
  • CPCCOM2001   Read and interpret plans and specifications
    • CIT Code: CNST852
      Cost: Standard $45.00
      Description: This unit of competency specifies the skills and knowledge required to read and interpret plans and specifications relevant to construction operations at a basic level.The unit is suitable for those with basic skills and knowledge undertaking routine work tasks under the direction of more experienced workers.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of unit CPCCWHS1001Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
  • CPCCCM2012   Work safely at heights
    • CIT Code: CNST847
      Cost: Standard $60.00
      Description: This unit specifies the skills and knowledge required to work safely on construction sites where the worker has the potential to fall from one level to another. This unit of competency does not cover the erection of scaffold or work platforms, but it does include identifying and reporting common faults with scaffold or work platform systems. Work at heights is undertaken in a range of construction work, including new construction, renovation, refurbishment and maintenance. This unit also applies to workers in other industries who need to control the two separate risks associated with people and objects falling from heights. Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCCWHS1001 Prepare to work safely in the construction industry meets this requirement. Licensing, legislative, regulatory or certification requirements apply to this unit of competency in some states and territories. For further information, check with the relevant regulatory authority.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
  • CPCCOM1012   Work effectively and sustainably in the construction industry
    • CIT Code: CNST848
      Cost: Standard $30.00
      Description: This unit of competency specifies the skills and knowledge required to work effectively and sustainably work in the construction industry. The unit includes the identification and clarification of the construction industry work context, scope and employment conditions, responsibility required to be accepted by the individual, working in a team, individual career path improvement activities and sustainable work practices and techniques. The unit is suitable for those with basic skills and knowledge undertaking routine work tasks under the direction of more experienced workers.No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: Nil

Stage 1/Block 2 - Complete all 6

  • CPCCCM3005   Calculate costs of construction work
    • CIT Code: CNST987
      Cost: Standard $45.00
      Description: This unit of competency specifies the outcomes required to estimate materials, overheads, labour and time requirements and establish costs for the provision of products and services for construction work. The unit supports tradespersons and those in independent construction job roles to cost a construction project or part of a construction project. It applies to construction work on residential and commercial sites. No licensing, legislative, regulatory, or certification requirements apply to this unit of competency at the time of endorsement.
      Prerequisites: Nil
  • CPCCPD2013   Remove and replace doors and door and window components
    • CIT Code: CNST947
      Cost: Standard $20.00
      Description: This unit of competency specifies the skills and knowledge required to remove and replace doors and door and window furniture for the purpose of painting. The unit includes planning and preparation for the work, removal and replacement of doors and door and window furniture, and completion of clean-up activities.The unit is suitable for those with basic skills and knowledge undertaking routine work tasks under the direction of more experienced workers.Completion of the general construction industry training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCCWHS1001 Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
  • CPCCPD3021   Prepare existing coated surface for painting
    • CIT Code: CNST948
      Cost: Standard $60.00
      Description: This unit of competency specifies the skills and knowledge required to restore, repair and prepare different material surfaces for the application of paint. A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self-direction.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
  • CPCCPD3022   Apply paint by brush and roller
    • CIT Code: CNST949
      Cost: Standard $120.00
      Description: This unit of competency specifies the skills and knowledge required to apply brushed or rolled paint coatings to different materials to form a protective and decorative painted finish. The unit includes preparation of the work area, mixing of materials, application of paint, finishing of the surface and completion of clean-up activities.A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self direction.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
  • CPCCPD3025   Match specific paint colours
    • CIT Code: CNST952
      Cost: Standard $100.00
      Description: This unit of competency specifies the skills and knowledge required to colour-match new and existing painting finishes. The unit includes matching of paint colour to a specified sample.A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self-direction.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
  • CPCCPD3035   Prepare uncoated surfaces for painting
    • CIT Code: CNST988
      Cost: Standard $60.00
      Description: This unit of competency specifies the skills and knowledge required to prepare uncoated surfaces for the application of paint. A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self-direction. Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCCWHS1001Prepare to work safely in the construction industry meets this requirement. No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry

Stage 2/Block 3 - Complete all 4

  • CPCCCM2008   Erect and dismantle restricted height scaffolding
    • CIT Code: CNST839
      Cost: Standard $60.00
      Description: This unit specifies the skills and knowledge required to erect and dismantle restricted height scaffolding to provide work platforms for various occupational applications. This unit is restricted to modular scaffolding to a height of 4 metres and includes: - placement of safety barriers - the application of knowledge to handle, erect and dismantle a range of restricted height scaffolding systems. It applies to workers who work in a range of industries. It involves working in a team environment.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
  • CPCCCM3001   Operate elevated work platforms up to 11 metres
    • CIT Code: CNST787
      Cost: Standard $60.00
      Description: This unit of competency specifies the outcomes required to operate specific types of elevated work platforms (EWPs) safely and effectively in different locations, including on uneven terrain. The unit includes locating, setting up, operating and shutting down scissor lifts and self-propelled boom lifts with a boom length under 11 metres. The unit supports construction workers in the safe and effective operation of electrical, hydraulic and mechanical EWPs. The unit does not cover truck-mounted EWPs, powered telescoping devices, hinged devices or articulated devices, or any combination of these used to support a platform on which personnel, equipment and materials may be elevated to perform work and which has a boom length of 11 metres or more. It applies to construction work on residential and commercial work sites in new construction, renovation or refurbishment, and maintenance projects. Licensing, legislative, regulatory or certification requirements apply to this unit in some States. Relevant state and territory regulatory authorities should be consulted to confirm those requirements.
      Prerequisites: Nil
  • CPCCPB3026   Erect and maintain trestle and plank systems
    • CIT Code: CNST944
      Cost: Standard $30.00
      Description: This unit of competency specifies the skills and knowledge required to erect and monitor trestle and plank work platforms.A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of unit CPCCWHS1001Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
  • CPCCPD3030   Apply protective paint coating systems
    • CIT Code: CNST957
      Cost: Standard $80.00
      Description: This unit of competency specifies the skills and knowledge required to apply specialised paint coating systems as a protective measure against atmospheric conditions, sanitation and hygiene risks and the impacts of high traffic areas. The unit includes preparation of the work area and materials, application of the coating system and clean-up activities.A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self-direction.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry

Stage 2/Block 4 - Complete all 5

  • CPCCPD3026   Apply stains and clear timber finishes
    • CIT Code: CNST953
      Cost: Standard $60.00
      Description: This unit of competency specifies the skills and knowledge required to apply stains and clear timber finishes to different material surfaces, including previously stained or finished timber, to form a protective and decorative finish.The unit includes preparation of the work area and materials, staining of bare timber, application of clear finishes and completion of clean-up activities.A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self-direction.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
  • CPCCPD3028   Apply decorative paint finishes
    • CIT Code: CNST955
      Cost: Standard $80.00
      Description: This unit of competency specifies the skills and knowledge required to apply decorative paint finishes to a range of different material surfaces. The unit includes:preparation of the application areaapplication of:mirror paint finishesbroken colour effectsmodern acrylic finisheslining by brushbasic stencilling basic special effectscompletion of clean-up activities.A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self direction.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
  • CPCCPD3031   Work safely with lead-painted surfaces in the painting industry
    • CIT Code: CNST958
      Cost: Standard $125.00
      Description: This unit of competency specifies the skills and knowledge required to safely treat lead paint hazards.The unit includes hazard identification, preparation of the work area, removal of contaminated material, encapsulation of contaminated material and completion of clean-up activities.A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self-direction.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
  • CPCCPD3036   Work safely to encapsulate non-friable asbestos in the painting industry
    • CIT Code: CNST962
      Cost: Standard $85.00
      Description: This unit of competency specifies the skills and knowledge required to safely encapsulate non-friable asbestos hazards. A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self-direction.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCCWHS1001Prepare to work safely in the construction industrymeets this requirement.Relevant state and territory regulatory authorities should be consulted to confirm requirements to encapsulate non-friable asbestos.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
  • CPCCPD3029   Remove graffiti and apply anti-graffiti coatings
    • CIT Code: CNST956
      Cost: Standard $80.00
      Description: This unit of competency specifies the skills and knowledge required to remove graffiti and apply preventative materials to different surfaces to form graffiti-resistant surface systems. A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self-direction.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry

Stage 3/Block 5 - Complete all 5

  • CPCCPD3023   Apply texture coat paint finishes by brush, roller and spray
    • CIT Code: CNST950
      Cost: Standard $80.00
      Description: This unit of competency specifies the skills and knowledge required to apply texture coat paint finishes to different surfaces using brush, roller and spray.The unit includes preparation of the work area and materials, application of the texture coat paint and completion of clean-up activities.A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them without close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
  • CPCCPD3024   Apply paint by spray
    • CIT Code: CNST951
      Cost: Standard $110.00
      Description: This unit of competency specifies the skills and knowledge required to apply paint by spray onto different surfaces to form a protective paint finish.The unit includes preparation of materials and application area, setting up and testing of the spray equipment, application of paint and completion of clean-up activities.A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self-direction.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
  • CPCCPD3027   Remove and apply wallpaper
    • CIT Code: CNST954
      Cost: Standard $80.00
      Description: This unit of competency specifies the skills and knowledge required to apply wallpaper to walls of different materials to form a protective and decorative finish. A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self-direction.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of unit CPCCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
  • CPCCPD3033   Apply intumescent coatings
    • CIT Code: CNST960
      Cost: Standard $80.00
      Description: This unit of competency specifies the skills and knowledge required to apply intumescent coatings to a range of material surfaces.The unit includes preparation of the application area, application of the specialist coatings and completion of clean-up activities.A person who has achieved this unit of competency would be expected to take responsibility for organising and completing these tasks with a high degree of self-direction.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of CPCCWHS1001Prepare to work safely in the construction industrymeets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry
  • CPCCSP3003   Apply trowelled texture coat finishes
    • CIT Code: CNST970
      Cost: Standard $80.00
      Description: This unit specifies the skills and knowledge required to mix and apply trowelled texture coat finishes. A person working at this level would be expected to take responsibility for organising and completing tasks assigned to them, without close supervision.Completion of the general construction induction training program specified by the model Code of Practice for Construction Work is required for any person who is to carry out construction work. Achievement of unit CPCCWHS1001Prepare to work safely in the construction industry meets this requirement.No licensing, legislative or certification requirements apply to this unit at the time of publication.
      Prerequisites: CPCCWHS2001 Apply WHS requirements, policies and procedures in the construction industry

More Information

For more information about this course please contact CIT Student Services on (02) 6207 3188 or email infoline@cit.edu.au