Overview
This program covers metal fabrication and welding skills that are required for employment within our local and regional industry.
You will gain the skills and knowledge required of an engineering tradesperson within the fabrication trade (Sheetmetal working), e.g., Drawing interpretation, job planning, quality control, communication skills, and computer aided-drafting, advanced welding, and fabrication skills.
The Certificate III in Engineering – Fabrication Trade (Sheetmetal working) is for apprentices who are employed in the metals and engineering industry.
Sheetmetal (Light Fabrication) working with thinner materials such as stainless steel and mild steel to produce items such as kitchens, ducting, switch boards and other custom designed sheet metal works.
Qualification: |
Certificate III in Engineering - Fabrication Trade (Sheetmetal working) MEM31922 |
Next Intake: |
Semester 1 2025
|
Course No: |
C3-TS61 |
Campus: |
CIT Fyshwick |
Duration: |
6 semesters part-time (approx. 8 hours per week). |
Cost Info: |
Fee information for completing this course under an Australian Apprenticeship arrangement is available on the Apprenticeships and Traineeships page. The total course cost may vary if subjects are attempted more than once.
|
Indicative Cost: |
Apprentice
- Subsidised fee $3,000 |
Likely Job Outcome: |
Employment in the Engineering Fabrication industry that could include welding and light fabrication.
Light Fabrication - Air Conditioning Manufacture, Stainless Steel, Cabinet Manufacture and General Manufacture |
Application Type: |
Apprentice/Trainee |
| Share: |
|
Additional Information
You must purchase protective clothing and equipment (PPE) to wear in the workshops, as directed.
- Clear Safety glasses
- Cotton drill pants
- Long sleeve cotton drill shirt
- Fully enclosed work boots
- Hearing protection
- Welding gloves
- Welding helmet
Entry Requirements
You must:
- be employed in the metals industry
AND
- be an Apprentice or Trainee under the Australian Apprenticeship Scheme (AAS) and be registered with an Apprentice Network Provider (ANP) prior to enrolment.
Additional Information: This qualification may also be achieved through other pathways which do not involve a contract of training, such as recognition of prior learning. In all cases achievement or recognition of competence is necessary in all of the required units of competency to be awarded a national qualification.
Skills Recognition
To study any course at CIT (excluding non-accredited training) you must have a Unique Student Identifier (USI).
Literacy Skills Information
We suggest that you will need Australian Core Skills Framework literacy levels of at least 3 across reading, writing, learning, oral communication and, depending on your course of study, numeracy skills to successfully complete this course. If you do not have this level, you can still enrol and seek support to improve your skills or you may prefer to begin with the lower level course. Please visit Foundation Skills.
Transition Information
Qualifications at CIT are regularly updated or replaced to meet current industry needs and maximise your employment opportunities. If this occurs while you are part way through a qualification, you may need to vary your learning to meet the new national requirements. CIT will aim to make this as smooth as possible for you.
Subject Cancellations/Changes
To ensure positive outcomes for all students, CIT may need to cancel or change classes at short notice. CIT will make every effort to inform students as soon as changes are made and will also make every effort to offer alternative arrangements for students to meet the requirements of the subject and complete their qualification. In an unfortunate instance when this cannot be met, you will receive a full refund. Please ensure you maintain current contact details via CIT Self Service or by contacting CIT Student Services at infoline@cit.edu.au.
Subject Information
Complete 96 Credit Points
Year 1 - Complete 41 credit points
- MEM11011 Undertake manual handling
-
| CIT Code: | MFAB216 |
| Cost: | Apprentice $45.00 |
| Credit Points: | 2 |
| Description: | This unit of competency defines the skills and knowledge required to lift and move materials manually and/or using basic manual handling equipment in a wide range of environments.Maximum manual lifting weight is limited to Safe Work Australia recommendations.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 2 |
| Prerequisites: | MEM13015 Work safely and effectively in manufacturing and engineering
MEM16006 Organise and communicate information
|
- MEM16006 Organise and communicate information
-
| CIT Code: | MFAB218 |
| Cost: | Apprentice $45.00 |
| Credit Points: | 2 |
| Description: | This unit of competency covers the skills and knowledge required to access, organise and communicate information related to production, maintenance or associated processes or tasks that apply in manufacturing, engineering or related environments.For accessing and recording of data requiring system knowledge and judgement, Unit MEM16008 Interact with computing technology should be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 2 |
| Prerequisites: | MEM13015 Work safely and effectively in manufacturing and engineering
|
- MEM13015 Work safely and effectively in manufacturing and engineering
-
| CIT Code: | MFAB217 |
| Cost: | Apprentice $90.00 |
| Credit Points: | 2 |
| Description: | This unit of competency defines the skills and knowledge required to work effectively in manufacturing and engineering work situations, including planning routine work and participating in and following work health and safety (WHS) procedures. The unit applies to working either individually or in a team situation and includes contributing to work-related group activities in a manufacturing or engineering workplace. This unit covers WHS skills associated with carrying out routine operational activities safely and in compliance with legislative and regulatory requirements. The unit covers the skills associated with participation in quality systems, communication and cooperation with others. The unit applies to workplaces with informal or formal quality management and improvement systems.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 2 |
| Prerequisites: | Nil |
- MSMENV272 Participate in environmentally sustainable work practices
-
| CIT Code: | ENVI143 |
| Cost: | Apprentice $60.00 |
| Credit Points: | 3 |
| Description: | This unit describes the skills and knowledge required to comply with environmental regulations, identify environment issues and minimise the risks of negative impact on work and carry out improvements in own work area.
This unit applies to operators and team members who are required to follow procedures to work in an environmentally sustainable manner.
This unit applies to all sectors of the manufacturing industry and members of its value chain. It may also be applied to all sections of an organisation, including office and warehouse. This unit will need to be contextualised for the industry sector, organisation and section.
This unit applies to an individual working alone or as part of a team and working in liaison with other shift team members and the control room operator, as appropriate. |
| Prerequisites: | Nil |
- MEM18001 Use hand tools
-
| CIT Code: | MFAB219 |
| Cost: | Apprentice $45.00 |
| Credit Points: | 2 |
| Description: | This unit of competency defines the skills and knowledge required to use a range of hand tools for a variety of general engineering applications.This unit should not be selected if the hand tool is dedicated to a single operation or machine or when a machine-specific/customised tool is used.Where the interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.Where the selection and use of engineering measuring equipment is required unit MEM12023 Perform engineering measurements should also be selected.Where the selection and use of power tools/hand held operations is required unit MEM18002 Use power tools/hand held operations should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 2 |
| Prerequisites: | MEM11011 Undertake manual handling
MEM13015 Work safely and effectively in manufacturing and engineering
MEM16006 Organise and communicate information
|
- MEM18002 Use power tools/hand held operations
-
| CIT Code: | MFAB220 |
| Cost: | Apprentice $45.00 |
| Credit Points: | 2 |
| Description: | This unit of competency defines the skills and knowledge required to use a range of hand held power tools and fixed power tools for hand held operations used in a variety of general engineering applications.This unit should not be selected if the power tools used are dedicated to an operation or machine, e.g. nut-runner, air drill and power driver.Where the interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.Where the selection and use of engineering measuring equipment is required unit MEM12023 Perform engineering measurements should also be selected.Where the selection and use hand tools is required unit MEM18001 Use hand tools should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 2 |
| Prerequisites: | MEM11011 Undertake manual handling
MEM13015 Work safely and effectively in manufacturing and engineering
MEM16006 Organise and communicate information
|
- MEM09002 Interpret technical drawing
-
| CIT Code: | MFAB221 |
| Cost: | Apprentice $90.00 |
| Credit Points: | 4 |
| Description: | This unit of competency defines the skills and knowledge required to interpret technical drawings.Technical drawings may utilise perspective, exploded views or hidden view techniques and may include symbol glossaries. Drawings are provided to AS 1100 Technical drawing or AS 1102 Graphical symbols and their equivalents from the full range of engineering disciplines.Where any technical drawing, sketch, chart, diagram is only used as a technique for communication, then this unit does not apply: unit MEM12023 Perform engineering measurements or unit MEM16006 Organise and communicate information should be selected as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 4 |
| Prerequisites: | MEM12023 Perform engineering measurements
MEM12024 Perform computations
MEM13015 Work safely and effectively in manufacturing and engineering
MEM16006 Organise and communicate information
|
- MEM12024 Perform computations
-
| CIT Code: | MFAB222 |
| Cost: | Apprentice $60.00 |
| Credit Points: | 3 |
| Description: | This unit of competency defines the skills and knowledge required to estimate approximate answers to arithmetical problems, carry out calculations involving percentages and proportions, and determine simple ratios and averages. It also covers producing and interpreting simple charts and graphs in manufacturing, engineering or related environments.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 3 |
| Prerequisites: | MEM13015 Work safely and effectively in manufacturing and engineering
MEM16006 Organise and communicate information
|
- MEM12023 Perform engineering measurements
-
| CIT Code: | MFAB223 |
| Cost: | Apprentice $60.00 |
| Credit Points: | 5 |
| Description: | This unit of competency defines the skills and knowledge required to perform measurements requiring straightforward use of mechanical measuring devices which incorporate visual inspections representing units of measurement and associated calculations in a range of manufacturing, engineering and related environments. Measurements may be expressed in metric or imperial units.Electrical/electronic devices used are those not requiring the connection or disconnection of circuitry.Where the interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 5 |
| Prerequisites: | MEM13015 Work safely and effectively in manufacturing and engineering
MEM16006 Organise and communicate information
|
- MEM05005 Carry out mechanical cutting
-
| CIT Code: | MFAB224 |
| Cost: | Apprentice $45.00 |
| Credit Points: | 2 |
| Description: | This unit of competency defines the skills and knowledge required to set up and operate a range of mechanical cutting and holing equipment. Typical applications of this unit include cutting for manufacture, production cutting and cutting materials in a maintenance environment.Where the interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.Where the selection and use of power tools for hand held operations is required unit MEM18002 Use power tools/hand held operations should also be selected.Where operational maintenance of equipment is required unit MEM07001 Perform operational maintenance of machines/equipment should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 2 |
| Prerequisites: | MEM11011 Undertake manual handling
MEM12023 Perform engineering measurements
MEM13015 Work safely and effectively in manufacturing and engineering
MEM16006 Organise and communicate information
MEM18001 Use hand tools
|
- MEM05007 Perform manual heating and thermal cutting
-
| CIT Code: | MFAB225 |
| Cost: | Apprentice $45.00 |
| Credit Points: | 2 |
| Description: | This unit of competency defines the skills and knowledge required to perform manual heating, thermal cutting and gouging including the assembly and disassembly and operation of the equipment on a range of materials.Where the selection and use of tools is required unit MEM18001 Use hand tools and unit MEM18002 Use power tools/hand held operations, should also be selected as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 2 |
| Prerequisites: | MEM09002 Interpret technical drawing
MEM11011 Undertake manual handling
MEM12023 Perform engineering measurements
MEM13015 Work safely and effectively in manufacturing and engineering
MEM16006 Organise and communicate information
|
- MEM05050 Perform routine gas metal arc welding
-
| CIT Code: | MFAB226 |
| Cost: | Apprentice $45.00 |
| Credit Points: | 2 |
| Description: | This unit of competency defines the skills and knowledge required to prepare materials and carry out routine gas metal arc welding (GMAW) and applies in a maintenance or manufacturing environment where the weld quality is not required to meet an Australian Standard or equivalent.Where welding is required to meet AS 1554 General Purpose or equivalent codes, work health and safety (WHS) regulations and/or licensing requirements unit MEM05017 Weld using gas metal arc welding process should also be selected.Where the interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.Where the selection and use of engineering measurement is required unit MEM12023 Perform engineering measurements should also be selected.Where the selection and use of tools is required unit MEM18001 Use hand tools and unit MEM18002 Use power tools/hand held operations, should also be selected as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 2 |
| Prerequisites: | MEM11011 Undertake manual handling
MEM13015 Work safely and effectively in manufacturing and engineering
MEM16006 Organise and communicate information
|
- MEM05049 Perform routine gas tungsten arc welding
-
| CIT Code: | MFAB236 |
| Cost: | Apprentice $35.00 |
| Credit Points: | 2 |
| Description: | This unit of competency defines the skills and knowledge required to prepare the materials and carry out routine gas tungsten arc welding (GTAW) and applies in a maintenance or manufacturing environment where the weld quality is not required to meet an Australian Standard.Where welding is required to meet AS 1554 General Purpose or equivalent codes, work health and safety (WHS) regulations and/or licensing requirements Unit MEM05019 Weld using gas tungsten arc welding process should also be selected.Where the interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.Where the selection and use of engineering measurement is required unit MEM12023 Perform engineering measurements should also be selected.Where the selection and use of tools is required unit MEM18001 Use hand tools and unit MEM18002 Use power tools/hand held operations, should also be selected as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 2 |
| Prerequisites: | MEM11011 Undertake manual handling
MEM13015 Work safely and effectively in manufacturing and engineering
MEM16006 Organise and communicate information
|
- MEM14006 Plan work activities
-
| CIT Code: | MFAB237 |
| Cost: | Apprentice $50.00 |
| Credit Points: | 4 |
| Description: | This unit of competency covers the skills and knowledge required to plan familiar work activities, whilst following established procedures and work health and safety (WHS) policies and procedures of the organisation.Planning is undertaken by the individual performing the work. Individual plan components may require modification and prioritising to meet job requirements or to respond to unforeseen circumstances. Where computations are required to be performed unit MEM12024 Perform computations should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 4 |
| Prerequisites: | MEM13015 Work safely and effectively in manufacturing and engineering
MEM16006 Organise and communicate information
|
- MEM05052 Apply safe welding practices
-
| CIT Code: | MFAB228 |
| Cost: | Apprentice $90.00 |
| Credit Points: | 4 |
| Description: | This unit of competency defines the skills and knowledge required to identify risks associated with welding operations that would typically conform to AS 1554 General Purpose and American Bureau of Shipping (ABS) or equivalent on all commonly used metals and the implementation of techniques used to reduce or eliminate welding hazards.This unit can only be selected in conjunction with one or more of the following units:MEM05015 Weld using manual metal arc welding processMEM05017 Weld using gas metal arc welding processMEM05019 Weld using gas tungsten arc welding processMEM05023 Weld using submerged arc welding processMEM05047 Weld using flux core arc welding processMEM05055 Weld using oxy fuel gas welding processNo licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 4 |
| Prerequisites: | MEM13015 Work safely and effectively in manufacturing and engineering
MEM16006 Organise and communicate information
|
Year 2 - Complete 30 credit points
- MEM05085 Select welding processes
-
| CIT Code: | MFAB254 |
| Cost: | Apprentice $110.00 |
| Credit Points: | 2 |
| Description: | This unit of competency was developed for engineering fabrication trade training and the recognition of trade skills in selecting welding processes.It defines the skills and knowledge required to identify basic material properties and select appropriate welding processes to produce welds that conform to AS 1554 General Purpose (GP) and American Bureau of Shipping (ABS) or equivalent as defined by the unit in conjunction with its prerequisites.The unit includes all welding processes within the scope of AS 1554 GP and the identification of basic properties and characteristics of all commonly welded metals to the extent required to inform the selection of appropriate welding processes.This unit must be selected in combination with one or more of the following units:MEM05090 Weld using manual metal arc welding processMEM05091 Weld using gas metal arc welding processMEM05092 Weld using gas tungsten arc welding processMEM05093 Weld using submerged arc welding processMEM05096 Weld using flux core arc welding processMEM05097 Weld using oxy fuel gas welding process.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 2 |
| Prerequisites: | MEM13015 Work safely and effectively in manufacturing and engineering
MEM16006 Organise and communicate information
|
- MEM05091 Weld using gas metal arc welding process
-
| CIT Code: | MFAB255 |
| Cost: | Apprentice $175.00 |
| Credit Points: | 4 |
| Description: | This unit of competency has been developed for Engineering Tradesperson Fabrication apprenticeship training and the recognition of trade-level skills in gas metal arc welding (GMAW) on heavy or light metal fabrications. It may also apply to other trade occupations requiring higher level GMAW welding skills.Weld quality would typically conform to Australian Standard 1554 General Purpose, and American Bureau of Shipping (ABS) or equivalent.Where manual thermal processes associated with preparation, pre-heat and/or post-heat is required unit MEM05007 Perform manual heating and thermal cutting and unit MEM05071Perform advanced manual thermal cutting, gouging and shaping, should also be selected as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 4 |
| Prerequisites: | MEM05050 Perform routine gas metal arc welding
MEM05052 Apply safe welding practices
MEM05085 Select welding processes
MEM09002 Interpret technical drawing
MEM11011 Undertake manual handling
MEM12023 Perform engineering measurements
MEM12024 Perform computations
MEM13015 Work safely and effectively in manufacturing and engineering
MEM14006 Plan work activities
MEM16006 Organise and communicate information
MEM18001 Use hand tools
MEM18002 Use power tools/hand held operations
|
- MEM05089 Assemble fabricated components
-
| CIT Code: | MFAB258 |
| Cost: | Apprentice $285.00 |
| Credit Points: | 8 |
| Description: | This unit of competency has been developed for Engineering Tradesperson Fabrication apprenticeship training and recognition of trade-level skills in the assembly of general fabricated components in plate, pipe and section or sheet in typical applications either on-site or in a fabrication workplace. Skills covered by this unit are generally applied in occupational and work situations associated with steel fabrication, boilermaking or sheet metal work. Work may be undertaken individually or as part of a team. Where assembly involves using pre-constructed jigs unit MEM03001 Perform manual production assembly and unit MEM03003 Perform sheet and plate assembly, should also be selected as appropriate.Where skills for the assembly of fabricated engineering components are required unit MEM18006 Perform precision fitting of engineering components should also be selected.Where welds are required to meet legislative or regulatory requirements, then appropriate welding units should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 8 |
| Prerequisites: | MEM05005 Carry out mechanical cutting
MEM05007 Perform manual heating and thermal cutting
MEM05052 Apply safe welding practices
MEM05085 Select welding processes
MEM09002 Interpret technical drawing
MEM11011 Undertake manual handling
MEM12023 Perform engineering measurements
MEM12024 Perform computations
MEM13015 Work safely and effectively in manufacturing and engineering
MEM14006 Plan work activities
MEM16006 Organise and communicate information
MEM18001 Use hand tools
MEM18002 Use power tools/hand held operations
|
- MEM16008 Interact with computing technology
-
| CIT Code: | MFAB238 |
| Cost: | Apprentice $90.00 |
| Credit Points: | 2 |
| Description: | This unit of competency defines the skills and knowledge required to use a range of computing technology typically used in manufacturing, engineering or related environments to access, input and store information.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 2 |
| Prerequisites: | MEM13015 Work safely and effectively in manufacturing and engineering
MEM16006 Organise and communicate information
|
- MEM05010 Apply fabrication, forming and shaping techniques
-
| CIT Code: | MFAB251 |
| Cost: | Apprentice $240.00 |
| Credit Points: | 8 |
| Description: | This unit of competency has been developed for Engineering Tradesperson – Fabrication apprenticeship training and the recognition of trade-level skills in fabrication, forming and shaping of a wide variety of shapes and products undertaken using a variety of forming and shaping techniques.
Fabrication, forming and shaping is done to specifications interpreted from technical drawings and job specifications using a variety of tools and equipment.
Skills covered by this unit are generally applied in occupational and work situations associated with steel fabrication, boiler making or sheet metal work.
Where heating and thermal cutting is required unit MEM05007 Perform manual heating and thermal cutting should also be selected.
Where marking off/out skills is required unit MEM12007 Mark off/out structural fabrications and shapes should also be selected.
Where welds are required to meet legislative or regulatory requirements appropriate welding units should also be selected.
No licensing, legislative or certification requirements apply to this unit at the time of publication. |
| Prerequisites: | MEM05037 Perform geometric development
MEM09002 Interpret technical drawing
MEM11011 Undertake manual handling
MEM12023 Perform engineering measurements
MEM12024 Perform computations
MEM13015 Work safely and effectively in manufacturing and engineering
MEM14006 Plan work activities
MEM16006 Organise and communicate information
MEM18001 Use hand tools
MEM18002 Use power tools/hand held operations
|
- MEM05037 Perform geometric development
-
| CIT Code: | MFAB252 |
| Cost: | Apprentice $190.00 |
| Credit Points: | 6 |
| Description: | This unit of competency has been developed for Engineering Tradesperson – Fabrication apprenticeship training and the recognition of trade-level skills in marking out general fabrications using geometric development techniques.
Marking out associated with geometric development is done to specifications interpreted from technical drawings and job specifications.
This unit applies in jobbing workshops and involves the development of templates and general fabricating using geometrical layout techniques.
Skills covered by this unit are generally applied in occupational and work situations associated with steel fabrication, boiler making or sheet metal work.
For skills required for marking out activities associated with general engineering and maintenance functions, see the following units:
MEM07005 Perform general machining
MEM12006 Mark off/out (general engineering)
MEM18006 Perform precision fitting of engineering components.
No licensing, legislative or certification requirements apply to this unit at the time of publication. |
| Prerequisites: | MEM09002 Interpret technical drawing
MEM12023 Perform engineering measurements
MEM12024 Perform computations
MEM13015 Work safely and effectively in manufacturing and engineering
MEM14006 Plan work activities
MEM16006 Organise and communicate information
|
Year 3 - Complete 28 credit points
- MEM17003 Assist in the provision of on-the-job training
-
| CIT Code: | MFAB243 |
| Cost: | Apprentice $100.00 |
| Credit Points: | 2 |
| Description: | This unit of competency defines the skills and knowledge required to assist in the provision of on-the-job training to others while undertaking normal duties and it may involve the replacement of normal duties with training duties for limited periods of time. The individual would not be expected to be solely responsible for the assessment or reporting of a trainee's progress. Typical applications could include the provision of on-the-job training by a tradesperson to apprentices/trainees or by a production worker to other production workers/trainees.Where the development of training programs is required unit MEM17001 Assist in development and deliver training in the workplace should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 2 |
| Prerequisites: | MEM13015 Work safely and effectively in manufacturing and engineering
MEM16006 Organise and communicate information
|
- MEM08010 Manually finish/polish materials
-
| CIT Code: | MFAB246 |
| Cost: | Apprentice $215.00 |
| Credit Points: | 6 |
| Description: | This unit of competency defines the skills and knowledge required to finish and polish materials using appropriate media and equipment. Where the interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.Where the selection and use of engineering measurement is required unit MEM12023 Perform engineering measurements should also be selected.Where the selection and use of power tools/hand held operations is required unit MEM18002 Use power tools/hand held operations should also be selected.This unit is not intended to apply to touch-up finishing related to maintenance or assembly activities.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 6 |
| Prerequisites: | MEM11011 Undertake manual handling
MEM13015 Work safely and effectively in manufacturing and engineering
MEM16006 Organise and communicate information
MEM18001 Use hand tools
|
- MEM05092 Weld using gas tungsten arc welding process
-
| CIT Code: | MFAB260 |
| Cost: | Apprentice $175.00 |
| Credit Points: | 4 |
| Description: | This unit of competency has been developed for Engineering Tradesperson Fabrication apprenticeship training and the recognition of trade-level skills in gas tungsten arc welding (GTAW) on heavy or light metal fabrications. It may also apply to other trade occupations requiring higher level GTAW welding skills.Weld quality must conform to AS 1554 General Purpose and American Bureau of Shipping (ABS), or equivalent.Where manual thermal processes associated with preparation, pre-heat and/or post-heat is required, the unit MEM05007 Perform manual heating and thermal cutting and the unit MEM05071 Perform advanced manual thermal cutting, gouging and shaping, must also be selected as appropriate.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 4 |
| Prerequisites: | MEM05049 Perform routine gas tungsten arc welding
MEM05052 Apply safe welding practices
MEM05085 Select welding processes
MEM09002 Interpret technical drawing
MEM11011 Undertake manual handling
MEM12023 Perform engineering measurements
MEM12024 Perform computations
MEM13015 Work safely and effectively in manufacturing and engineering
MEM14006 Plan work activities
MEM16006 Organise and communicate information
MEM18001 Use hand tools
MEM18002 Use power tools/hand held operations
|
- MEM05074 Perform advanced welding using gas tungsten arc welding process
-
| CIT Code: | MFAB261 |
| Cost: | Apprentice $210.00 |
| Credit Points: | 4 |
| Description: | This unit of competency has been developed for engineering fabrication trade training and the recognition of trade skills in advanced welding using manual metal arc welding.It defines the skills and knowledge required to plan, prepare for, and carry out advanced welding using gas tungsten arc welding (GTAW) where the weld would be required to conform to AS 1554 Structural Purpose (SP) or equivalent national or international standards or codes as defined in the unit in combination with its prerequisites.Where the welding associated with this unit also requires advanced manual thermal cutting, gouging and shaping, the unit MEM05071 Perform advanced manual thermal cutting, gouging and shaping must also be selected. Where the welding associated with this unit also requires the application of welding codes and standards, the unit MEM05062 Apply welding and welding related codes and standards must also be selected. Where the welding associated with this unit also requires the welding to be undertaken according to a formal welding procedure specification, the unit MEM05068 Apply welding procedure specifications must also be selected. Where formal weld records associated with the application of this unit are required to be maintained, the unit MEM05065 Maintain weld records must also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 4 |
| Prerequisites: | MEM05007 Perform manual heating and thermal cutting
MEM05049 Perform routine gas tungsten arc welding
MEM05052 Apply safe welding practices
MEM05085 Select welding processes
MEM05092 Weld using gas tungsten arc welding process
MEM09002 Interpret technical drawing
MEM11011 Undertake manual handling
MEM12023 Perform engineering measurements
MEM12024 Perform computations
MEM13015 Work safely and effectively in manufacturing and engineering
MEM14006 Plan work activities
MEM16006 Organise and communicate information
MEM18001 Use hand tools
MEM18002 Use power tools/hand held operations
|
- MEM07024 Operate and monitor machine and process
-
| CIT Code: | MFAB250 |
| Cost: | Apprentice $170.00 |
| Credit Points: | 4 |
| Description: | This unit of competency defines the skills and knowledge required to operate and monitor a machine and process and applies to a range of production operations or continuous processes.
The work is performed in accordance with clear step-by-step instructions and procedures documented on job sheets or similar process instruction documents.
Operational adjustments to the machine or process by the operator are made using external controls. Basic operation (excluding setting and tool adjustments) of computer numerically controlled (CNC) machines is also covered by this unit.
Where operational maintenance is required to be performed unit MEM07001 Perform operational maintenance of machines/equipment should also be selected.
Where the interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.
Where production packaging and labelling of the finished goods or product is required unit MEM11006 Perform production packaging should also be selected.
Where the selection and use of engineering measurement is required unit MEM12023 Perform engineering measurements should also be selected.
Where the selection and use of tools is required unit MEM18001 Use hand tools and unit MEM18002 Use power tools/hand held operations, should also be selected as appropriate.
This unit should not be selected with any of the following units unless the skills of this unit are being applied to an additional and different type of machine and or process:
MEM04001 Operate melting furnaces
MEM04002 Perform gravity die casting
MEM04003 Operate pressure die casting machine
MEM04006 Operate sand moulding and core making machines
MEM06001 Perform hand forging
MEM06002 Perform hammer forging
MEM08001 Perform wire, jig and barrel load/unload work
MEM08004 Finish work using wet, dry and vapour deposition methods
MEM08008 Operate and control surface finishing waste treatment process |
| Prerequisites: | MEM11011 Undertake manual handling
MEM13015 Work safely and effectively in manufacturing and engineering
MEM16006 Organise and communicate information
|
- MEM09009 Create 2-D drawings using computer-aided design system
-
| CIT Code: | MFAB231 |
| Cost: | Apprentice $265.00 |
| Credit Points: | 8 |
| Description: | This unit of competency defines the skills and knowledge required to produce 2-D drawings using a computer-aided design (CAD) system. Skills include producing linked bills of material, file management and associated customisation of installed software, including the use of macros, menus and default settings. 2-D drawings can be produced from 3-D models created using CAD system. The unit primarily applies to the fields of mechanical, electrical or electronic, fabrication and fluid power. This unit covers CAD skills only. Where detail drafting skills are required see the following units: MEM09004 Perform electrical or electronic detail drafting, MEM09005 Perform basic engineering detail drafting, MEM09006 Perform advanced engineering detail drafting. No licensing, legislative or certification requirements apply to this unit at the time of publication. |
| Prerequisites: | MEM09002 Interpret technical drawing
MEM12023 Perform engineering measurements
MEM12024 Perform computations
MEM13015 Work safely and effectively in manufacturing and engineering
MEM16006 Organise and communicate information
MEM16008 Interact with computing technology
|
Related Courses
More Information
For more information about this course please contact CIT Student Services on (02) 6207 3188 or email infoline@cit.edu.au
Study at CIT 
Current Students 
Industry/Business