Skip to Content
Need Help Live Chat
Statement of Attainment Licence to Perform Dogging CPCCLDG3001

Overview

This unit specifies the skills and knowledge required to safely perform dogging work. Dogging consists of the application of slinging techniques to move a load, including the selection and inspection of lifting gear, and the directing of a plant operator in the movement of a load when the load is out of sight of the operator.

Dogging work is conducted in the construction industry and other industries where loads are lifted and moved using cranes or hoists.

Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCCWHS1001 Prepare to work safely in the construction industry meets this requirement.

Licensing/Regulatory Information 

Legislative and regulatory requirements are applicable to this unit of competency.

This unit is based on the licensing requirements of Part 4.5 of the Model Work Health and Safety (WHS) regulations and meets Commonwealth, state, and territory HRWL requirements.

The National Assessment Instrument (NAI) is the mandated assessment for the HRWL to operate the relevant licencing class as detailed in this unit.

On successful completion, you will be eligible to apply for a high-risk licence in the ACT. This licence is issued by Access Canberra, not CIT.

Qualification:

Statement of Attainment - Licence to Perform Dogging CPCCLDG3001

Course No:

SA-TS84

Campus:

CIT Bruce 

Duration:

This program runs for four (4) weeks with attendance two (2) evenings per week for four (4) hours. You will be required to attend an additional full day to undertake your assessment.
Arrangements can be made for groups to attend for five (5) full days over one (1) week.
You must also complete additional time in the workplace or at CIT, undertaking various tasks related to dogging work. This time will vary depending on the experiences of the individual learner.

Cost Info:

Further information about fees is available at Course fees and assistance

Indicative Cost:

$1490.00

Likely Job Outcome:

Employment to perform Dogging

Application Type:

Register Your Interest
Share:

Additional Information

Students will be issued with a training logbook on registration for the purpose of recording training received on site and formal training at CIT. Notification will be given to registered students when formal classes are scheduled. There will opportunities to attend classes during the day and/or evenings.

On successful completion, you will be eligible to apply for a high-risk licence in the ACT. This licence is issued by Access Canberra, not CIT.

You will need to provide clothing and appropriate safety footwear suitable for working on a construction site including personal protective equipment (PPE).

Skills Recognition

Entry Requirements

Be physically fit and able to work at heights
AND
Be at least 18 years of age - this is a requirement in the ACT for licensing of Persons Performing High Risk Work.
AND
Have access to an appropriate workplace with the required equipment - part of the assessment requirements for this course is an industry logbook. Teaching staff can give advice as to what workplaces are appropriate.
AND
Have the English language skills to effectively communicate and work safely with others in the work area and to read and comprehend manufacturer's instructions and workplace procedures and safety signs. Students must also be able to apply mathematical procedures for the estimation and measurement of loads. These skills will be checked prior to enrolment.
(You will need to collect and retain confirmed evidence of any entry requirements if stated)

To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).

Literacy Skills Information

We suggest that you will need Australian Core Skills Framework literacy levels of at least 3 across reading, writing, learning, oral communication and, depending on your course of study, numeracy skills to successfully complete this course. If you do not have this level, you can still enrol and seek support to improve your skills or you may prefer to begin with the lower level course. Please visit Foundation Skills.

Transition Information

Qualifications at CIT are regularly updated or replaced to meet current industry needs and maximise your employment opportunities. If this occurs while you are part way through a qualification, you may need to vary your learning to meet the new national requirements. CIT will aim to make this as smooth as possible for you.

Subject Cancellations/Changes

To ensure positive outcomes for all students, CIT may need to cancel or change classes at short notice. CIT will make every effort to inform students as soon as changes are made and will also make every effort to offer alternative arrangements for students to meet the requirements of the subject and complete their qualification. In an unfortunate instance when this cannot be met, you will receive a full refund. Please ensure you maintain current contact details via CIT Self Service or by contacting CIT Student Services at infoline@cit.edu.au.


Subject Information

Complete 1 subject

Complete 1

  • CPCCLDG3001   Licence to perform dogging
    • CIT Code: CNST929
      Cost: Full fee $1,490.00
      Description: This unit specifies the skills and knowledge required to safely perform dogging work. Dogging consists of the application of slinging techniques to move a load, including the selection and inspection of lifting gear, and the directing of a plant operator in the movement of a load when the load is out of sight of the operator.Dogging work is conducted in the construction industry and other industries where loads are lifted and moved using cranes or hoists.Completion of the general construction induction training program, specified in the Safe Work Australia model Code of Practice: Construction Work, is required by anyone carrying out construction work. Achievement of CPCCWHS1001 Prepare to work safely in the construction industry meets this requirement.Competence in this unit does not in itself result in a licence. A licence is obtained after competence is assessed under applicable Commonwealth, state or territory work health and safety (WHS) regulations.
      Prerequisites: Nil

Related Courses

Statement Attainment Licence to Erect, Alter, and Dismantle Scaffolding CPCCLSF2001, CPCCLSF3001, CPCCLSF4001
Statement Attainment GWO BST Rescue and Emergency Training
Statement Attainment Licence to Operate a Personnel and Materials Hoist CPCCLHS3001
Statement Attainment Entry into Working Safely in Construction
Statement Attainment training Rigging for a Licence
Non-Accredited Training Verification of Currency (VOC) in High Risk Work - Dogging
Non-Accredited Training Verification of Currency VOC in High Risk Work - Scaffolding
Non-Accredited Training Verification of Currency (VOC) in High Risk Work - Rigging

More Information

For more information about this course please contact CIT Student Services on (02) 6207 3188 or email infoline@cit.edu.au