Skip to Content
Need Help Live Chat
Statement of Attainment training in Operating a Vehicle Loading Crane (capacity 10 metre tonnes and above) (CV)

Overview

This unit specifies the skills and knowledge required to safely operate a vehicle loading crane with a Maximum Rated Capacity (MRC) of 10 metre tonnes or more.
Vehicle loading crane means a crane mounted on a vehicle for loading and unloading the vehicle.
A person performing this work is required to hold a vehicle loading crane HRWL.
This unit requires a person operating a slewing vehicle loading crane with a MRC of 10 metre tonnes or more to:
- plan for the work/task
- prepare for the work/task
- perform work/task
- pack up

Licensing/Regulatory Information
Legislative and regulatory requirements are applicable to this unit of competency.
This unit is based on the licensing requirements of Part 4.5 of the Model Work Health and Safety (WHS) regulations and meets Commonwealth, state, and territory HRWL requirements.
The National Assessment Instrument (NAI) is the mandated assessment for the HRWL to operate the relevant licencing class as detailed in this unit.
On successful completion, you will be eligible to apply for a high-risk licence in the ACT. This licence is issued by Access Canberra, not CIT.

Qualification:

Statement of Attainment - training in Operating a Vehicle Loading Crane (capacity 10 metre tonnes and above) (CV)

Course No:

SA-TS80

Campus:

CIT Bruce 

Duration:

4 weeks - Part time (2 x 4-hour evenings per week for 4 weeks, plus 1 day assessment)
Prior to assessment approximately 40hours of workplace training is required to be recorded in an industry logbook.
We can tailor our high-risk work training schedule to suit your business needs.
We can run courses at times that are convenient for you and your staff, including evenings and weekends. We offer courses for small or large groups and can even deliver training at your workplace.
Contact us today to see how we can help you: HighRiskandRenewables@cit.edu.au

Cost Info:

Further information about fees is available at Course fees and assistance

Indicative Cost:

$1490

Likely Job Outcome:

Employment as a Vehicle Crane operator in the Construction industry.

Application Type:

Register Your Interest
Share:

Additional Information

Students will be issued with a training logbook on registration for the purpose of recording training received on site and formal training at CIT. Notification will be given to registered students when formal classes are scheduled. There will opportunities to attend classes during the day and/or evenings.

On successful completion, you will be eligible to apply for a high-risk licence in the ACT. This licence is issued by Access Canberra, not CIT.

You will need to provide clothing and appropriate safety footwear suitable for working on a construction site including personal protective equipment (PPE).

Skills Recognition

Entry Requirements

You must:
Be physically fit and able to work at heights
AND
Be at least 18 years of age - this is a requirement in the ACT for licensing of Persons Performing High Risk Work
AND
Have access to an appropriate workplace with the required equipment - part of the assessment requirements for this course is an industry logbook. Teaching staff can give advice as to what workplaces are appropriate
AND
Have the English language skills to effectively communicate and work safely with others in the work area and to read and comprehend manufacturer's instructions and workplace procedures and safety signs. Students must also be able to apply mathematical procedures for the estimation and measurement of loads. These skills will be checked prior to enrolment.

To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).

Literacy Skills Information

We suggest that you will need Australian Core Skills Framework literacy levels of at least 3 across reading, writing, learning, oral communication and, depending on your course of study, numeracy skills to successfully complete this course. If you do not have this level, you can still enrol and seek support to improve your skills or you may prefer to begin with the lower level course. Please visit Foundation Skills.

Transition Information

Qualifications at CIT are regularly updated or replaced to meet current industry needs and maximise your employment opportunities. If this occurs while you are part way through a qualification, you may need to vary your learning to meet the new national requirements. CIT will aim to make this as smooth as possible for you.

Subject Cancellations/Changes

To ensure positive outcomes for all students, CIT may need to cancel or change classes at short notice. CIT will make every effort to inform students as soon as changes are made and will also make every effort to offer alternative arrangements for students to meet the requirements of the subject and complete their qualification. In an unfortunate instance when this cannot be met, you will receive a full refund. Please ensure you maintain current contact details via CIT Self Service or by contacting CIT Student Services at infoline@cit.edu.au.


Subject Information

Complete 1 subject

Core: Complete 1

  • TLILIC0024   Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above)
    • CIT Code: CNST1000
      Cost: Full fee $1,490.00
      Description: This unit specifies the skills and knowledge required to safely operate a vehicle loading crane with a Maximum Rated Capacity (MRC) of 10 metre tonnes or more. Competence in this unit, does not in itself result in a High-Risk Work Licence (HRWL) to operate this plant. Vehicle loading crane means a crane mounted on a vehicle for loading and unloading the vehicle. A person performing this work is required to hold a vehicle loading crane HRWL. This unit requires a person operating a slewing vehicle loading crane with a MRC of 10 metre tonnes or more to: plan for the work/task prepare for the work/task perform work/task pack up. Licensing/Regulatory Information Legislative and regulatory requirements are applicable to this unit of competency. This unit is based on the licensing requirements of Part 4.5 of the Model Work Health and Safety (WHS) regulations and meets Commonwealth, state and territory HRWL requirements. The National Assessment Instrument (NAI) is the mandated assessment for the HRWL to operate the relevant licencing class as detailed in this unit.
      Prerequisites: Nil

Related Courses

Statement Attainment Operating a Mobile Crane for a Licence [CN to CO]
Statement Attainment Licence to Operate a Tower Crane CPCCLTC4001
Non-Accredited Training Verification of Currency (VOC) in High Risk Work - Cranes

More Information

For more information about this course please contact CIT Student Services on (02) 6207 3188 or email infoline@cit.edu.au