Skip to Content
Statement of Attainment training in High Risk Construction for a Licence [from CPC08]

Overview

This training will provide you with the skills and knowledge required to be able to perform various high risk tasks necessary for licensing in the construction industry. You can gain skills in one or more of the following areas: dogging (BIA), rigging (BIA), scaffolding (BIA), and Elevated Work Platforms; (EWP) above 11 metres.

This training program achieves one or more units of competency from the Construction, Plumbing and Services Training Package (CPC08)

Qualification: Statement of Attainment - training in High Risk Construction for a Licence [from CPC08]
Program No: SA-TS01
Campus: CIT Bruce 
Duration: Part-time (approx.12 hours per week for 3 weeks plus 1 day Assessment)
Likely Job Outcome: License for High Risk Work
Application Type: Private
Share:

Additional Information

Students will be issued with a training log book on registration for the purpose of recording training received on site and formal training at CIT. Notification will be given to registered students when formal classes are scheduled. There will be opportunity to attend classes during the day and/or evenings.

Entry Requirements / How to Apply

You must:

Be physically fit and able to work at heights

AND

Be at least 18 years of age - this is a requirement in the ACT for licensing of Persons Performing High Risk Work

AND

Have access to an appropriate workplace with the required equipment - part of the assessment requirements for this course is an industry logbook. Teaching staff can give advice as to what workplaces are appropriate

AND

Have the English language skills to effectively communicate and work safely with others in the work area and to read and comprehend manufacturer's instructions and workplace procedures and safety signs. Students must also be able to apply mathematical procedures for the estimation and measurement of loads. These skills will be checked prior to enrolment.

WarningIMPORTANT
Before you apply/enrol

To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI). This includes new students and re-enrolling students.

If you don't have a USI that's ok, you can apply right now. It only takes two minutes, just go to usi.gov.au

Already have one? Great! Verify it in our student administration system now so your enrolment or graduation isn't delayed. (New CIT students will not be able to do this until they have been given their CIT number which will be given to you when you apply to study most CIT courses).

  1. Login to CIT Self Service
  2. Click on the link for USI
  3. Verify your USI

It's important that your first name, surname and date of birth in our student system match the ID you use to create your USI (eg if you are Christopher in USI database and Chris at CIT your USI will not verify).

If you need assistance you can go to Unique Student Identifier (USI), drop in to any CIT Library or CITSA office or contact CIT Student Services on 6207 3188.

Transition Information

Qualifications at CIT are regularly updated or replaced to meet current industry needs and maximise your employment opportunities. If this occurs while you are part way through a qualification, you may need to vary your learning to meet the new national requirements. CIT will aim to make this as smooth as possible for you.

Subject Cancellations/Changes

To ensure positive outcomes for all students, CIT may need to cancel or change classes at short notice. CIT will make every effort to inform students as soon as changes are made and will also make every effort to offer alternative arrangements for students to meet the requirements of the subject and complete their qualification. In an unfortunate instance when this cannot be met, you will receive a full refund. Please ensure you maintain current contact details via CIT Self Service or by contacting CIT Student Services at infoline@cit.edu.au.


Subject Information

Core - Complete a minimum of 1 subject (including all pre-requisite requirements)

  • CPCCLHS3001A  Licence to operate a personnel and materials hoist
    • CIT Code: CNST596
      Cost: $780
      Description: This unit specifies the outcomes required to operate a builder's hoist in which personnel, goods and/or materials may be hoisted, and which comprises a car, structure, machinery or other equipment associated with the hoist, and which may be a cantilever hoist, a tower hoist or a multiple winch operation. Included in this definition are situations where winches may be configured to operate as hoists for the transportation of personnel for licensing purposes.
      Prerequisites: Nil
  • CPCCLHS3002A  Licence to operate a materials hoist
    • CIT Code: CNST597
      Cost: $730
      Description: This unit specifies the outcomes required to operate a materials hoist being a builder's hoist by which only goods or materials and not personnel may be hoisted and where the car, bucket or platform is cantilevered from, and travels up and down externally to, a face of the support structure for licensing purposes.
      Prerequisites: Nil
  • CPCCLDG3001A  Licence to perform dogging
    • CIT Code: CNST595
      Cost: $1450
      Description: This unit specifies the outcomes required to perform slinging techniques, including the selection and inspection of lifting gear and/or the directing of the crane operator in the movement of the load when the load is out of view of the crane/ operator for licensing purposes.
      Prerequisites: Nil
  • CPCCLRG4001A  Licence to perform rigging advanced level
    • CIT Code: CNST600
      Cost: $1450
      Description: This unit specifies the outcomes required to perform rigging work at the advanced level, which includes all the outcomes for rigging work at the basic and intermediate levels, and also includes rigging of gin poles and shear legs, flying foxes and cable ways, guyed derricks and structures, and suspended scaffolds and fabricated hung scaffolds for licensing purposes.
      Prerequisites: Nil
  • CPCCLSF4001A  Licence to erect, alter and dismantle scaffolding advanced level
    • CIT Code: CNST603
      Cost: $1450
      Description: This unit specifies the outcomes required to erect, alter and dismantle scaffolding at the Advanced level. Scaffolding consists of all intermediate scaffolding work including all other scaffolding work connected with the use and operation of Hung scaffold
      Prerequisites: Nil
  • CPCCLRG3001A  Licence to perform rigging basic level
    • CIT Code: CNST598
      Cost: $1450
      Description: This unit specifies the outcomes required to perform basic rigging work associated with movement of plant and equipment, steel erections, hoists (including mast climbing hoists), placement of pre-cast concrete, safety nets and static lines, perimeter safety screens and shutters; and cantilever crane loading platforms for licensing purposes.
      Prerequisites: Nil
  • CPCCLSF2001A  Licence to erect, alter and dismantle scaffolding basic level
    • CIT Code: CNST601
      Cost: $1450
      Description: This unit specifies the outcomes required to erect, alter and dismantle scaffolding at the basic level, consisting of scaffolding work connected with the operation or use of modular or pre-fabricated scaffolds, cantilevered materials hoists with a maximum working load of 500kg, ropes and gin wheels, safety nets and static lines, and bracket scaffolds (tank and formwork) for licensing purposes.
      Prerequisites: Nil
  • CPCCLSF3001A  Licence to erect, alter and dismantle scaffolding intermediate level
    • CIT Code: CNST602
      Cost: $1450
      Description: This unit specifies the outcomes required to erect, alter and dismantle scaffolding at the Intermediate level which includes use and operation of Cantilevered crane-loading platforms, Cantilevered and spurred scaffolds, Barrow ramps and sloping platforms, perimeter safety screens and shutters Mast climbers, and tube and coupler scaffolds (including tube and coupler covered ways and gantries) for licensing purposes.
      Prerequisites: Nil
  • CPCCLRG3002A  Licence to perform rigging intermediate level
    • CIT Code: CNST599
      Cost: $1550
      Description: This unit specifies the outcomes required to perform rigging work at the intermediate level, which includes all the outcomes for rigging work at the basic level, and also includes rigging of cranes, rigging of conveyors, rigging of dredges and excavators, rigging associated with tilt slabs, rigging associated with demolition work, and dual lifts for licensing purposes.
      Prerequisites: Nil

More Information

For more information about this course please contact CIT Student Services on (02) 6207 3188 or email infoline@cit.edu.au