This course will give you the engineering skills and knowledge required for an engineering draftsperson producing engineering drawings or a technical officer involved in basic project management, procurement and sales within an engineering or manufacturing work environment.
|Qualification:||Diploma of Engineering - Technical MEM50212|
|Duration:||2 semesters full-time (approx. 20 hours per week of classes) or part-time equivalent.|
The 2019 Semester 2 enrolment fees for this course are based on the costs per subject as indicated below. The total program cost may vary depending on the choice of elective subjects or if subjects are attempted more than once.
Subject costs identified as Standard are partially subsidised by the ACT Government. Concessions may be available to eligible students.
Costs identified as Apprentice or Trainee apply only to students studying as part of an Australian Apprenticeship arrangement. The qualification cost for an Apprentice or Trainee is subsidised by the ACT Government. Concessions may be available to eligible Apprentices or Trainees.
Costs identified as Full Fee receive no government subsidy. Concessions are not available.
Further information about fees is available at Course fees and assistance.
Information about studying under Skilled Capital is also available.
|Likely Job Outcome:||Engineering draftsperson or a technical officer involved in drafting, basic project management, procurement and sales often with a consulting engineering firm.|
This program has pre-requisite requirements. All prerequisites must be achieved. Discuss with a CIT teacher during enrolment to ensure you have met these requirements.
In this program you will need a scientific calculator and textbooks worth approximately $500. Your teacher will advise you about these materials on enrolment.
Entry Requirements / How to Apply
To be successful in this program, it is recommended that you have appropriate numeracy skills. On entry, you may need to demonstrate this by undertaking a numeracy assessment. You may be required to undertake additional Foundation Skills subjects to support your learning in this program.
To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).
University of Canberra
Bachelor of Engineering in Network and Software Engineering (Honours)
Literacy Skills Information
We suggest that you will need Australian Core Skills Framework literacy levels of at least 3 across reading, writing, learning, oral communication and, depending on your program of study, numeracy skills to successfully complete this program. If you do not have this level, you can still enrol and seek support to improve your skills or you may prefer to begin with the lower level program. Please visit Foundation Skills or phone (02) 6207 4872 to have a chat to one of our teachers.
Complete 20 subjects
Complete all 18
Organise and communicate information
CIT Code: COMM153 Cost: Standard $44.00 Description: This unit covers accessing, organising and communicating information related to processes or tasks. Prerequisites: Nil
Interact with computing technology
CIT Code: COMP173 Cost: Standard $44.00 Description: This unit covers accessing, inputting and storing information used in manufacturing, engineering or related environments, using computing technology. Prerequisites: Nil
Select common engineering materials
CIT Code: ENGR204 Cost: Standard $88.00 Description: This unit covers recognising common materials used in engineering, assisting in the selection of a material for a specific application, and using test results to evaluate the properties of materials. Prerequisites: Nil
Participate in environmentally sustainable work practices
CIT Code: ENVI143 Cost: Standard $102.00 Description: This unit of competency covers the skills and knowledge required to effectively find out current resource use and carry out improvements, in own work area, including those that reduce the negative environmental impacts of work practices.This unit of competency applies to operators/team members who are required to follow procedures to work in an environmentally sustainable manner. This maximises the environmental performance of the process and the organisation, ensures regulatory compliance, and aims to minimise environmental risks and impacts.This unit of competency applies to all sectors of the manufacturing industry and members of its value chain. It may also be applied to all sections of an organisation, including office and warehouse. This unit will need to be contextualised for the industry sector, organisation and section.This unit of competency applies to an individual working alone or as part of a team/work group and working in liaison with other shift team members and the control room operator, as appropriate. Prerequisites: Nil
Apply mathematical techniques in a manufacturing engineering
or related environment
CIT Code: MATH182 Cost: Standard $88.00 Description: This unit covers applies the concepts of mathematics? to appropriate and simple engineering situations within the individual's area of engineering expertise. Prerequisites: MEM12024A Perform computations
Operate computer-aided design (CAD) system to produce basic
CIT Code: CADR148 Cost: Standard $109.00 Description: This unit of competency covers the skills and knowledge required to apply functions of computer-aided design (CAD) software programs that are typically used in the production of detail drawings. Prerequisites: Nil
Interpret technical drawing
CIT Code: ENGR127 Cost: Standard $88.00 Description: This unit covers interpreting technical drawing applying to any of the full range of engineering disciplines. Prerequisites: Nil
Interpret architectural and engineering design specifications
for structural steel detailing
CIT Code: ENGR250 Cost: Standard $88.00 Description: This unit covers the skills and knowledge required to interpret design related information required for the commencement of a structural steel detailing project Prerequisites: MEM09002B Interpret technical drawing
Apply technical mathematics
CIT Code: ENGR274 Cost: Standard $176.00 Description: This unit of competency covers the application of mathematical analysis, graphical and software techniques to engineering problems. It includes exponential and logarithmic functions, trigonometric equations involving single and double angles, sequences and series, two dimensional vector analysis, complex numbers, determinants and matrices. Prerequisites: Nil
Apply fluid and thermodynamics principles in engineering
CIT Code: ENGR275 Cost: Standard $176.00 Description: This unit of competency covers the application of fluid and thermodynamic principles to engineering applications. It includes sustainability issues; fundamental scientific principles; fundamentals of vacuum technology; properties of gases and liquids; heat transfer due to conduction, convection and radiation heat and compression processes; closed and open systems; continuity, enthalpy and energy transfers related to compressors, boilers, turbine heat exchangers, heat engines, refrigerators and heat pump performance. It also includes fluid systems and components, forces on floating and submerged bodies, turbine and pumping systems, and jet forces on blades and plates. Prerequisites: MEM23004A Apply technical mathematics
Apply engineering mechanics principles
CIT Code: ENGR276 Cost: Standard $132.00 Description: This unit of competency covers the application of mechanics and strength of materials principles to devices, machines and systems and their components in order to identify key mechanical properties. It includes a range of basic analyses of static and dynamic loads and moments, stresses and deflections, velocities and accelerations. Prerequisites: Nil
Produce basic engineering drawings
CIT Code: ENGR260 Cost: Standard $176.00 Description: This unit of competency covers producing drawings or similar graphical representations where the critical dimensions and associated tolerances and design specifications are predetermined. Prerequisites: Nil
Create 3-D model assemblies using computer-aided design (CAD)
CIT Code: ENGR240 Cost: Standard $248.00 Description: This unit of competency covers preparing the 3-D computer-aided design/drafting (CAD) environment, creating and modifying 3-D model assemblies and producing output to inform manufacture or assembly. Prerequisites: MEM09002B Interpret technical drawing
MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements
Create 3-D solid models using computer-aided design (CAD)
CIT Code: ENGR241 Cost: Standard $248.00 Description: This unit covers preparing the 3-D computer-aided drafting (CAD) environment, creating and modifying 3-D solid models, and producing output from the 3-D model. Prerequisites:
MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements
Manage self in the engineering environment
CIT Code: ENGR280 Cost: Standard $88.00 Description: This unit covers performing work ethically and competently, making judgements about work priorities and information requirements to achieve effective working relationships and engineering outcomes. Prerequisites: MEM16006A Organise and communicate information
Source and estimate engineering materials requirements
CIT Code: ENGR281 Cost: Standard $88.00 Description: This unit of competency covers the skills and knowledge required to locate and approve a materials source and estimate materials requirements against a specification or bill of materials for engineering-related operations. This includes consideration of quantities, quality and capacity of suppliers to supply in accordance with a supply plan. Prerequisites: Nil
Perform mechanical engineering design drafting
CIT Code: ENGR268 Cost: Standard $197.00 Description: This unit of competency covers the preparation of design drawings or graphics used in the mechanical engineering, manufacturing engineering and related industry sectors. The unit includes working with a design brief or concept prepared by an engineer or other designer as well as the specification of items, functions, limits, fits, tolerances, and other engineering information required for the eventual production of fully detailed drawings. The unit requires the design drawing to be performed using appropriate computer-aided design (CAD) and other drafting techniques that include sketching, computer graphics and the application of drawing standards. Prerequisites: Nil
Contribute to the systematic management of WHS risk
CIT Code: OHSS411 Cost: Standard $88.00 Description: This unit describes the skills and knowledge required to contribute to the systematic management of work health and safety (WHS) risk. It applies to individuals who provide specialised knowledge, systematic approaches and guidance to a range of personnel. NOTE: The terms 'occupational health and safety' (OHS) and 'work health and safety' (WHS) are equivalent and generally either can be used in the workplace. In jurisdictions where the National Model WHS Legislation has not been implemented RTOs are advised to contextualise the unit of competency by referring to the existing State/Territory OHS legislative requirements. No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication. Prerequisites: Nil
Electives: Complete 2
Set up basic pneumatic circuits
CIT Code: ENGR273 Cost: Standard $88.00 Description: This unit covers setting up and selecting components associated with single linear pneumatic systems. Prerequisites: Nil
Set up basic hydraulic circuits
CIT Code: ENGR272 Cost: Standard $88.00 Description: This unit covers setting up and selecting components associated with single linear hydraulic systems. Prerequisites: Nil
Electives: Complete 2
Undertake site surveys and set-out procedures for building
CIT Code: BLDG156 Cost: Standard $186.00 Description: This unit of competency specifies the outcomes required to undertake site surveys and set out procedures for civil and residential building projects. It includes the use of basic measuring and levelling equipment, recording and interpretation of data, and evaluation of and compliance with relevant legislation. Prerequisites: Nil
Perform site investigation activities
CIT Code: SCNC134 Cost: Standard $88.00 Description: This unit of competency covers the ability to prepare for and conduct activities, such as excavations, sampling and testing, as part of a site investigation team. Personnel are expected to identify common site problems and seek advice to deal with situations beyond their own technical competence. This unit of competency is applicable to laboratory assistants working under the close supervision of a senior technician in the construction, mining and drilling industry sectors. While no specific licensing or certification requirements apply to this unit at the time of publication, laboratory operations are governed by relevant legislation, regulations and/or external accreditation requirements. Local requirements should be checked. Prerequisites: Nil
|Statement Attainment training||Advanced Engineering Drafting [extract from MEM50212]|
|Statement Attainment training||Basic Engineering Drafting [extract from MEM50212]|
For more information about this course please contact CIT Student Services on (02) 6207 3188 or email firstname.lastname@example.org