Skip to Content
Live Chat
Statement of Attainment training in Operating a Mobile Crane for a Licence [from TLI]

Overview

This training will provide you with the skills and knowledge required to perform various high risk tasks necessary for licensing in the construction industry. You can gain skills in operating a slewing mobile crane (up to 20 tonnes, 60 tonnes, 100 tonnes and over 100 tonnes) and/or a non-slewing mobile crane (greater than 3 tonnes capacity).

This training achieves units of competency from the Transport and Logistics Training Package (TLI).

Qualification: Statement of Attainment - training in Operating a Mobile Crane for a Licence [from TLI]
Program No: SA-TS04
Campus: CIT Bruce 
Duration: Part-time approx.8 hours per week for 4 weeks plus 1 day Assessment. 40 hours in LOG BOOK. As per ACT Requirement.
Cost Info:

The 2019 Semester 2 enrolment fees for this course are based on the costs per subject as indicated below. The total program cost may vary depending on the choice of elective subjects or if subjects are attempted more than once.

Subject costs identified as Standard are partially subsidised by the ACT Government. Concessions may be available to eligible students.

Costs identified as Apprentice or Trainee apply only to students studying as part of an Australian Apprenticeship arrangement. The qualification cost for an Apprentice or Trainee is subsidised by the ACT Government. Concessions may be available to eligible Apprentices or Trainees.

Costs identified as Full Fee receive no government subsidy. Concessions are not available.

Further information about fees is available at Course fees and assistance.

Information about studying under Skilled Capital is also available.

Indicative Cost: $1800
Likely Job Outcome: Licence for High Risk Work,
Enrolment Type: Full Fee
Share:

Timetable Information

To help with the enrolment process print your timetable, or keep the window open, so that you can refer back to it for your course (program) code, course (program) name, and the Course Reference Numbers (CRNs).

Additional Information

Students will be issued with a training log book on registration for the purpose of recording training received on site and formal training at CIT. Notification will be given to registered students when formal classes are scheduled. There will be opportunity to attend classes during the day and/or evenings.

On successful completion, you will be eligible to apply for a high risk licence in the ACT. This licence is issued by Access Canberra, not CIT. 

Entry Requirements / How to Apply

You must:

Be physically fit and able to work at heights
AND
Be at least 18 years of age - this is a requirement in the ACT for licensing of Persons Performing High Risk Work
AND
Have access to an appropriate workplace with the required equipment - part of the assessment requirements for this course is an industry logbook. Teaching staff can give advice as to what workplaces are appropriate
AND
Have the English language skills to effectively communicate and work safely with others in the work area and to read and comprehend manufacturer's instructions and workplace procedures and safety signs. Students must also be able to apply mathematical procedures for the estimation and measurement of loads. These skills will be checked prior to enrolment.

To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).

  • Transition Information

    • Qualifications at CIT are regularly updated or replaced to meet current industry needs and maximise your employment opportunities. If this occurs while you are part way through a qualification, you may need to vary your learning to meet the new national requirements. CIT will aim to make this as smooth as possible for you.

  • Subject Cancellations/Changes

    • To ensure positive outcomes for all students, CIT may need to cancel or change classes at short notice. CIT will make every effort to inform students as soon as changes are made and will also make every effort to offer alternative arrangements for students to meet the requirements of the subject and complete their qualification. In an unfortunate instance when this cannot be met, you will receive a full refund. Please ensure you maintain current contact details via CIT Self Service or by contacting CIT Student Services at infoline@cit.edu.au.


Subject Information



Complete 1 subject

Core: Complete 1

  • TLILIC0008   Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)
    • CIT Code: CNST798
      Cost: Full fee $1,800.00
      Description: This unit specifies the skills and knowledge required to operate a non-slewing mobile crane with a Maximum Rated Capacity (MRC) exceeding 3 tonnes safely, in accordance with all relevant legislative responsibilities. Competence in this unit, does not in itself result in a HRWL licence to operate this plant. A person undertaking this unit must hold: - a current National High-Risk Work Licence (HRWL) or a certification for a specific VET course for HRWL to perform dogging Non-slewing mobile crane means a mobile crane incorporating a boom or jib that cannot be slewed, and includes: - an articulated mobile crane - a locomotive crane - but does not include vehicle tow trucks. A person performing this work is required to hold a non-slewing mobile crane HRWL. This unit requires a person operating non-slewing mobile crane with an MRC exceeding 3 tonnes to: - plan the work/task - prepare for the work/task - perform work/task - pack up
      Prerequisites: Nil
  • TLILIC0010   Licence to operate a slewing mobile crane (up to 20 tonnes)
    • CIT Code: CNST799
      Cost: Full fee $1,800.00
      Description: This unit specifies the skills and knowledge required to safely operate a slewing mobile crane with a maximum rated capacity (MRC) up to 20 tonnes, in accordance with all relevant legislative responsibilities. Competence in this unit, does not in itself result in a HRWL licence to operate this plant. A person undertaking this unit must hold: - a current National High-Risk Work Licence (HRWL) to perform dogging or a certification for a specific VET course for HRWL to perform dogging Slewing mobile crane means a mobile crane incorporating a boom or jib that can be slewed, but does not include: - a front-end loader or - a backhoe or - an excavator or - other earth moving equipment, when configured for crane operation. A person performing this work is required to hold a slewing mobile crane with an MRC up to 20 tonnes high risk work (HRW) licence. This unit requires a person operating a slewing mobile crane with an MRC up to 20 tonnes to: - plan for the work/task - prepare for the work/task - perform work/task - pack up
      Prerequisites: Nil
  • TLILIC0013   Licence to operate a slewing mobile crane (up to 60 tonnes)
    • CIT Code: CNST800
      Cost: Full fee $1,800.00
      Description: This unit specifies the skills and knowledge required to safely operate a slewing mobile crane with a Maximum Rated Capacity (MRC) up to 60 tonnes, in accordance with all relevant legislative responsibilities. Competence in this unit, does not in itself result in a HRWL licence to operate this plant. A person undertaking this unit must hold: - a current National High-Risk Work Licence (HRWL) to perform dogging or a certification for a specific VET course for HRWL to perform dogging Slewing mobile crane means a mobile crane incorporating a boom or jib that can be slewed, but does not include: - a front-end loader or - a backhoe or - an excavator or - other earth moving equipment, when configured for crane operation. A person performing this work is required to hold a slewing mobile crane with an MRC up to 60 tonnes HRWL. This unit requires a person operating a slewing mobile crane with an MRC up to 60 tonnes to: - plan for the work/task - prepare for the work/task - perform work/task - pack up
      Prerequisites: Nil
  • TLILIC0014   Licence to operate a slewing mobile crane (up to 100 Tonnes)
    • CIT Code: CNST801
      Cost: Full fee $1,800.00
      Description: This unit specifies the skills and knowledge required to safely operate a slewing mobile crane with a Maximum Rated Capacity (MRC) up to 100 tonnes, in accordance with all relevant legislative responsibilities. Competence in this unit, does not in itself result in a HRWL licence to operate this plant. A person undertaking this unit must hold: - a current National High-Risk Work Licence (HRWL) to perform dogging or a certification for a specific VET course for HRWL to perform dogging - a current National HRWL to operate a slewing mobile crane (up to 60 Tonnes) or a certification for a specific VET course for HRWL to operate a slewing mobile crane (up to 60 Tonnes) Slewing mobile crane means a mobile crane incorporating a boom or jib that can be slewed, but does not include: - a front-end loader or - a backhoe or - an excavator or - other earth moving equipment, when configured for crane operation. A person performing this work is required to hold a slewing mobile crane with an MRC up to 100 tonnes HRWL. This unit requires a person operating a slewing mobile crane with an MRC up to 100 tonnes to: - plan for the work/task - prepare for the work/task - perform work/task - pack up
      Prerequisites: Nil
  • TLILIC0015   Licence to operate a slewing mobile crane (over 100 Tonnes)
    • CIT Code: CNST802
      Cost: Full fee $1,800.00
      Description: This unit specifies the skills and knowledge required to safely operate a slewing mobile crane with a maximum rated capacity (MRC) over 100 tonnes, in accordance with all relevant legislative responsibilities. Competence in this unit, does not in itself result in a HRWL licence to operate this plant. A person undertaking this unit must hold: - a current National High-Risk Work Licence (HRWL) to perform dogging or a certification for a specific VET course for HRWL to perform dogging - a current National HRWL to operate a Slewing Mobile crane (up to 100 Tonnes) or a certification for a specific VET course for HRWL to operate a Slewing Mobile crane (up to 100 Tonnes) Slewing mobile crane means a mobile crane incorporating a boom or jib that can be slewed, but does not include: - a front-end loader or - a backhoe or - an excavator or - other earth moving equipment, when configured for crane operation. A person performing this work is required to hold a slewing mobile crane with an MRC over 100 tonnes HRWL. This unit requires a person operating a slewing mobile crane with an MRC over 100 tonnes to: - plan for the work/task - repare for the work/task - perform work/task - pack up
      Prerequisites: Nil

Related Courses

Statement Attainment training Operating a Vehicle Loading Crane (capacity 10 metre tonnes and above) [from TLI]
Statement Attainment training Operating a Tower Crane for a Licence [from CPC08]
Non-Accredited Training Verification of Currency (VOC) in High Risk Work - Cranes

More Information

For more information about this course please contact CIT Student Services on (02) 6207 3188 or email infoline@cit.edu.au