Skip to Content
Feedback Live Chat
Statement of Attainment training in Wind Safety Introduction [from CPC08, HLT and UET12]

Overview

CIT is combining with Aspen Medical Pty Ltd (RTO 88188) to offer training for working safely in the wind industry.  These safety skills have been identified by industry as a necessary requirement for any person working at a wind farm.

You will enrol at CIT for this program.  CIT will issue the Statement of Attainment for any competency completed.

CIT (0101) will train and assess:  CPCCCM2010B Work Safely at Heights and CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry.

Aspen (88188) will train and assess:  HLTWHS005 Conduct Manual Tasks Safely, HLTAID001 Provide Cardiopulmonary Resuscitation, HLTAID003 Provide First Aid and UETTDRRF06B Perform Rescue from a Live Low Voltage Panel.

Qualification: Statement of Attainment - training in Wind Safety Introduction [from CPC08, HLT and UET12]
Program No: SA-CR02
Campus: CIT Bruce 
Duration: You may select to complete 1 or more competency as required.

Each competency includes a training session of half day or full day with some requiring an online learning component before the training session.
Cost:

Enrolment fees for this course are based on the costs per subject as indicated below. In addition, a Service and Amenities fee of $40 will be payable each semester. Further information is available at Course fees and assistance

Likely Job Outcome: Entry to renewable energy industry, wind sector.
Application Type: Public
Share:

Entry Requirements / How to Apply

Open entry

To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).

  • Literacy Skills Information

    • We suggest that you will need Australian Core Skills Framework literacy levels of at least 3 across reading, writing, learning, oral communication and, depending on your program of study, numeracy skills to successfully complete this program. See below to check your literacy skills. If you do not have this level, you can still enrol and seek support to improve your skills or you may prefer to begin with the lower level program. Please visit Education and Community or phone (02) 6207 4872 to have a chat to one of our teachers.

  • Transition Information

    • Qualifications at CIT are regularly updated or replaced to meet current industry needs and maximise your employment opportunities. If this occurs while you are part way through a qualification, you may need to vary your learning to meet the new national requirements. CIT will aim to make this as smooth as possible for you.

  • Subject Cancellations/Changes

    • To ensure positive outcomes for all students, CIT may need to cancel or change classes at short notice. CIT will make every effort to inform students as soon as changes are made and will also make every effort to offer alternative arrangements for students to meet the requirements of the subject and complete their qualification. In an unfortunate instance when this cannot be met, you will receive a full refund. Please ensure you maintain current contact details via CIT Self Service or by contacting CIT Student Services at infoline@cit.edu.au.


Subject Information

Complete all 6 subjects

  • CPCCCM2010B  Work safely at heights
    • CIT Code: CNST565
      Cost: $20.00
      Description: This unit of competency specifies the outcomes required to work safely on construction sites where the work activity involves working above 1.5 metres from ground level and where fall protection measures are required.
      Prerequisites: OHSS249 CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry
  • CPCCOHS2001A  Apply OHS requirements, policies and procedures in the construction industry
    • CIT Code: OHSS249
      Cost: $40.00
      Description:

      This unit of competency specifies the outcomes required to carry out OHS requirements through safe work practices at any on or off-site construction workplace. It requires the performance of work in a safe manner through awareness of risks and work requirements, and the planning and performance of safe work practices with concern for personal safety and the safety of others.

      Prerequisites: Nil
  • HLTWHS005  Conduct manual tasks safely
    • CIT Code: WPHS115
      Cost: $60.00
      Description: This unit describes the skills and knowledge required to recognise potentially hazardous manual tasks, and then to prepare for and complete those tasks in a safe manner.
      This unit applies to all workers involved in manual handling tasks.
      Prerequisites: Nil
  • UETTDRRF06B  Perform rescue from a live LV panel
    • CIT Code: WPHS116
      Cost: $20.00
      Description: This Competency Standard Unit covers the performance of rescue procedures from live Low Voltage (LV) apparatus, not including overhead lines and underground cables in the work place. It specifies the mandatory requirements of rescue from a live LV panel and how they apply in the context of transmission, distribution or rail work functions. It encompasses responsibilities for, health, safety and risk management processes at all operative levels and adherence to safety practices as part of the normal way of doing work.
      Prerequisites: Nil
  •  Providing cardiopulmonary resuscitation
    • CIT Code: HESC575
      Cost: $20.00
      Description:

      This unit describes the skills and knowledge required to perform cardiopulmonary resuscitation (CPR) in line with the Australian Resuscitation Council (ARC) Guidelines.
      This unit applies to all workers who may be required to provide CPR, in a range of situations, including community and workplace settings.
      This subject achieves Unit of Competency: HLTAID001 Provide cardiopulmonary resuscitation

      Prerequisites: Nil
  •  Providing first aid
    • CIT Code: HESC576
      Cost: $40.00
      Description: This unit describes the skills and knowledge required to provide a first aid response to a casualty. The unit applies to all workers who may be required to provide a first aid response in a range of situations, including community and workplace settings.
      This subject achieves Unit of Competency: HLTAID003 Provide first aid
      Prerequisites: Nil

Related Courses

Statement Attainment training Working in the Wind Industry [from UEE11]

More Information

For more information about this course please contact CIT Student Services on (02) 6207 3188 or email infoline@cit.edu.au