Skip to Content
Live Chat
Statement of Attainment training in Supervising Asbestos Removal [extract from CPC40110]

Overview

This training will give you the skills and knowledge required to supervise the removal process for friable and non-friable asbestos containing material (ACM). It includes planning for and supervising the removal process, including preparing the work area and the work site, using safe and compliant removal practices, maintaining safety procedures, and supervising the decontamination and removal processes.

Ensuring compliance with the asbestos removal control plan (ARCP) is central to the effective performance of the role. This includes ensuring and documenting required air monitoring and other testing. Certification processes are conducted by licensed asbestos assessors according to legislation.

This unit is required for all supervisors of the ACM removal process. Candidates are advised to check for regulatory requirements in the ACT.

This training achieves a unit from the Certificate IV in Building and Construction (CPC40110).

Qualification: Statement of Attainment - training in Supervising Asbestos Removal [extract from CPC40110]
Program No: SA-BD11
Campus: CIT Bruce 
Duration: Weekend workshop.
Cost Info:

Enrolment fees for this course are based on the costs per subject as indicated below. In addition, a Service and Amenities fee of $40 will be payable each semester. Further information is available at Course fees and assistance

Indicative Cost: $400
Likely Job Outcome: On successful completion of this program you will be able to apply for an asbestos awareness card from WorkSafe to work in the asbestos removal industry. Asbestos removal supervision from domestic or commercial construction work sites, covering demolition or new work sites, renovation, extensions or restorations.
Application Type: Private
Share:

Additional Information

Candidates are advised to check for regulatory requirements in NSW and ACT.

Entry Requirements / How to Apply

You must have a relevant Certificate III Trade qualification or equivalent skills and knowledge AND a current Induction Card.

A current Induction Card is required for access to a building site where the supervision of asbestos removal is commonly conducted. It is also a pre-requisite requirement for this program. To gain this card and to do the training in Supervising Asbestos Removal you must successfully complete the unit CPCCOHS1001A - Work safely in the construction industry. It is available for study in SA-BE24 training in Construction Induction.

Literacy and numeracy assessments may be conducted prior to program commencement.

To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI).

  • Transition Information

    • Qualifications at CIT are regularly updated or replaced to meet current industry needs and maximise your employment opportunities. If this occurs while you are part way through a qualification, you may need to vary your learning to meet the new national requirements. CIT will aim to make this as smooth as possible for you.

  • Subject Cancellations/Changes

    • To ensure positive outcomes for all students, CIT may need to cancel or change classes at short notice. CIT will make every effort to inform students as soon as changes are made and will also make every effort to offer alternative arrangements for students to meet the requirements of the subject and complete their qualification. In an unfortunate instance when this cannot be met, you will receive a full refund. Please ensure you maintain current contact details via CIT Self Service or by contacting CIT Student Services at infoline@cit.edu.au.


Subject Information

Complete 1 subject

  • CPCCBC4051A  Supervise asbestos removal
    • CIT Code: BLDG174
      Description:

      This unit of competency specifies the outcomes required to supervise the removal process for friable and non-friable asbestos containing material (ACM). The unit includes planning for and supervising the removal process, including preparing the work area and the work site, using safe and compliant removal practices, maintaining safety procedures, and supervising the decontamination and removal processes.

      Ensuring compliance with the asbestos removal control plan (ARCP) is central to the effective performance of the role. This includes ensuring and documenting that required air monitoring and other testing and certification processes are conducted by licensed asbestos assessors according to legislation.

      Prerequisites: OHSS436 CPCCOHS1001A WORK SAFELY IN THE CONSTRUCTION INDUSTRY

Related Courses

Diploma Building and Construction (Building) CPC50210
Diploma Building and Construction (Management) CPC50308
Certificate IV Building and Construction (Building) CPC40110
Certificate IV Building and Construction (Estimating) CPC40308
Certificate IV Building and Construction (Site Management) CPC40508
Certificate IV Building and Construction (Contract Administration) CPC40208
Certificate II Construction Pathways CPC20211
Statement Attainment Lead a Building, Construction or Plumbing and Services Team CPCSS00001
Statement Attainment Course Asbestos Awareness 10675NAT
Statement Attainment Course Working Safely with Asbestos Containing Materials 10559NAT
Statement Attainment training Removal of Non-Friable Asbestos (Class B) [from CPC08]
Non-Accredited Training Understanding the Building Code of Australia (BCA)
Non-Accredited Training Understanding Building Plans
Non-Accredited Training Timber Framing Code Basics
Non-Accredited Training Estimating for Builders Basics

More Information

For more information about this course please contact CIT Student Services on (02) 6207 3188 or email infoline@cit.edu.au