Skip to Content
Statement of Attainment training in Removal of Non-Friable Asbestos (Class B) [from CPC08]


This training will provide you with the skills and knowledge required to remove non-friable asbestos containing material (ACM). This program includes preparing, containing and removing non-friable ACM, and includes knowledge of decontamination and disposal requirements. On successful completion, you can apply to the Office of Regulatory Services in ACT to obtain a 'Class B' Asbestos Removal Licence.

Qualification: Statement of Attainment - training in Removal of Non-Friable Asbestos (Class B) [from CPC08]
Program No: SA-TS16
Campus: CIT Bruce 
Duration: 2 day workshop.
Likely Job Outcome: Obtain a 'Class B' Asbestos removal licence to work on a non-friable asbestos (bonded) removal site.
Application Type: Skills Training

Additional Information

Occupational licenses are required nationally. Work must be completed according to relevant legislative, industry, customer and organisational requirements, including work health and safety (WHS) policies and procedures.

Regulatory mechanisms apply to this unit. This unit is required for all ACM removal workers engaged in the removal of non-friable ACM. Candidates are advised to check for regulatory requirements in NSW and ACT.

You are required to bring a 'P2 dust mask' to the workshops.

Entry Requirements / How to Apply

By enrolling, CIT assumes you have checked and met these entry requirements. CIT staff will confirm either before (for all VET FEE-HELP qualifications) or within the first few weeks of classes.

You must:
- have CPCCOHS1001A Work safely in the construction industry before entering a construction worksite.
If you do not hold this competency or a Construction Induction Card you can achieve it by enrolling in the Training Program in Construction Induction (SA-BE24).
- be at least 18 years of age

Literacy and numeracy assessments may be conducted prior to program commencement.

Before you apply/enrol

To study any course at CIT (excluding degrees and non-accredited training) you must have a Unique Student Identifier (USI). This includes new students and re-enrolling students.

If you don't have a USI that's ok, you can apply right now. It only takes two minutes, just go to

Already have one? Great! Verify it in our student administration system now so your enrolment or graduation isn't delayed. (New CIT students will not be able to do this until they have been given their CIT number which will be given to you when you apply to study most CIT courses).

  1. Login to CIT Self Service
  2. Click on the link for USI
  3. Verify your USI

It's important that your first name, surname and date of birth in our student system match the ID you use to create your USI (eg if you are Christopher in USI database and Chris at CIT your USI will not verify).

If you need assistance you can go to Unique Student Identifier (USI), drop in to any CIT Library or CITSA office or contact CIT Student Services on 6207 3188.

Literacy Skills Information

We suggest that you will need Australian Core Skills Framework levels of at least 2 across reading, writing, learning, oral communication and, depending on your program of study, numeracy skills to successfully complete this program. See below to check your literacy skills. If you do not have this level, you can still enrol and seek support to improve your skills or you may prefer to begin with a lower level program, or enrol in the Certificate I in Skills for Vocational Pathways (FSK10213) to develop your literacy skills. Please visit Education and Community or phone (02) 6207 4872 to have a chat to one of our teachers.

Transition Information

Qualifications at CIT are regularly updated or replaced to meet current industry needs and maximise your employment opportunities. If this occurs while you are part way through a qualification, you may need to vary your learning to meet the new national requirements. CIT will aim to make this as smooth as possible for you.

Subject Cancellations/Changes

To ensure positive outcomes for all students, CIT may need to cancel or change classes at short notice. CIT will make every effort to inform students as soon as changes are made and will also make every effort to offer alternative arrangements for students to meet the requirements of the subject and complete their qualification. In an unfortunate instance when this cannot be met, you will receive a full refund. Please ensure you maintain current contact details via CIT Self Service or by contacting CIT Student Services at

Subject Information

Complete 1 subject

  • CPCCDE3014A  Remove non-friable asbestos
    • CIT Code: CNST767
      Cost: $40.00

      This unit of competency specifies the outcomes required to remove non-friable asbestos containing material (ACM). The unit includes preparing, containing and removing non-friable ACM, and includes knowledge of decontamination and disposal requirements.

      Prerequisites: Nil

Related Courses

Diploma Building and Construction (Building) CPC50210
Diploma Building and Construction (Management) CPC50308
Certificate IV Building and Construction (Site Management) CPC40508
Certificate IV Building and Construction (Building) CPC40110
Certificate IV Building and Construction (Contract Administration) CPC40208
Certificate IV Building and Construction (Estimating) CPC40308
Certificate II Construction Pathways CPC20211
Statement Attainment Course Working Safely with Asbestos Containing Materials 10559NAT
Statement Attainment Course Asbestos Awareness 10314NAT
Statement Attainment training Building and Construction Introduction [extract from CPC40110]
Statement Attainment training Supervising Asbestos Removal [extract from CPC40110]
Statement Attainment training Building Management [extract from CPC40110]
Non-Accredited Training Estimating for Builders Basics
Non-Accredited Training Introduction to Dispute Resolution
Non-Accredited Training Timber Framing Code Basics
Non-Accredited Training Understanding the Building Code of Australia (BCA)
Non-Accredited Training Understanding Building Plans
Non-Accredited Training Understanding Building Contracts
Non-Accredited Training Understanding the Development Approval Process
Non-Accredited Training Building Information Modelling for Builders

More Information

For more information about this course please contact CIT Student Services on (02) 6207 3188 or email